News Center

Where is the USB to RJ11 Cable Used?

Learn more about the USB to RJ11 RJ12 Cable with Premier Cable.


USB to RJ11 RJ12 Serial Control Cable


What is RJ11 Cable?


RJ11 is a telephone cable plug used to connect telephone cable to devices such as telephone devices, modems, or routers. It typically has 4 pin, but it can also have 2 or 6 pins, depending on its usage scenario.


The RJ11 cable is typically made of standard telephone cable, which contains four wires for transmitting voice signals or low speed data signals.


The arrangement of these lines follows specific standards to ensure interoperability between devices. RJ11 cable are also referred to as "telephone cable" or "analog telephone cable" because they are used to transmit analog signals rather than digital signals.


USB to RJ11 RJ12 Tax Controller Cable

Where is USB to RJ11 Cable be Applied?


The USB to RJ11 cable is typically used to connect a USB interface to devices that require the RJ11 interface, such as fax machines, modems, telephone line testers, and so on. The function of this conversion line is to convert USB signals into RJ11 signals in order to transfer data or signals between USB devices and RJ11 devices. Some usage scenarios include:


Connecting a computer and modem: On computers that do not have a built-in modem, you can connect the computer to an external modem using a USB to RJ11 cable to access the Internet.


Connecting a computer to a fax machine: Using a USB to RJ11 cable, you can connect the computer to a fax machine to send and receive faxes through the computer.


Connecting a telephone line tester: By using a USB to RJ11 cable, you can connect the telephone line tester to a computer to analyze and test the signal quality and reliability of the telephone line.


Note that not all devices support the use of USB to RJ11 cables. Before using, please check the device's user manual or contact the manufacturer to ensure compatibility and availability.

Premier Cable provides customizable USB to RJ11 RJ12 RJ45 cable harnesses, which can be applied to POS machines, tax controlled cash register keyboards, fixed barcode devices, handheld scanning guns, portable barcode devices, intelligent agricultural trade traceability electronic scales, portable digital meters, bank self-service devices, POS cash registers, POS printers, POS cash boxes, touch screen cash registers, and other devices. Welcome to leave a message or email to learn more about your customizations.


POS Cash Register Printer USB RJ11 Cable

Touch Screen Cash Register Electronic Scale Cable USB Serial

Related News

What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.

CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.

Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.

Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."

What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.

The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.