Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
News Center
What is USB HID Mode?
Publish:
2023-03-30 10:18
Source:
www.premier-cable.net
HID refers to Human Interface Device, which refers to various input devices that can be used to interact with computers or other electronic devices, such as keyboards, mice, game consoles, touchpads, digital cameras, and so on.

HIDs typically use common drivers and protocols, allowing them to run on different operating systems and platforms. In a computer, HID devices are typically connected to the computer through a USB interface.
HID devices are widely used in various devices such as personal computers, laptops, mobile phones, tablets, game consoles, and are an indispensable part of human-computer interaction.
HID is a drive free device that can be directly plugged in and used. However, HID devices do not necessarily have a human-machine interface, as long as they meet the HID category specification, they are HID devices.

Some HID devices can communicate through serial ports through a USB interface. This type of serial communication is called USB serial communication or virtual serial communication. In this case, the HID device uses a USB interface to simulate a serial device, just like traditional serial ports, which can exchange data through serial communication protocols.
This USB serial communication can be used in many application scenarios, such as controlling hardware devices, data acquisition, data transmission, and so on. Because USB interfaces are faster than traditional serial ports and support features such as hot swapping and multi device connectivity, they have replaced traditional serial communication in many applications.
Premier Cable provides USB HID control cables for different devices, such as mouse, keyboard, touchpad, POS machine, telephone device, VCR remote control, conferening cameras, control panel, etc. It can conduct serial communication, meet current automation and smart requirements. OEM Support!

Related News
What is a terminal block used for?
While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.
CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.
Introduction to M12 connector pin coding
M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.
Cables – What are the correct cable sizes for an NMEA 2000 network?
The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."
What are the advantages of NMEA 2000?
The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.
The role of DeviceNet terminal resistor
DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.