News Center

What Cable Does Cisco Switch Console Use?

www.premier-cable.net


Cisco's routers have RJ45 or DB25 based DCE/DTE consoles and AUX ports. You can connect to these ports using a terminal (DTE) or modem (DCE). In either case, you need to have an RJ45 cable: an RJ45 to USB or RJ45 to DB25 or RJ45 to DB9 connector.

 

FTDI USB A to RJ45 Cisco Huawei Router Switch Console Cable

 

The console port uses an 8-pin RJ-45 connector. If you did not order a console cable, you need to provide an RJ45 to DB9 adapter cable to connect the switch console port to the PC console port.

 

USB to RJ45 console cable, directly connected to any USB port on a laptop, can be connected to a Cisco console port without an adapter. It is applicable to Cisco console ports such as Cisco 1000, 1600, 2500, 2600, 3600 series routers, Catalyst 3560 switch pins, etc

 

Video Conferencing Camera USB Type C to RJ45 Serial Cisco Console Cable


Describes:

 

1. USB FTDI FT232R chip+RS232 shifter.

 

2. Supports Android, Win 7, Win 8, XP, 2000, Linux, and Mac OS, and is used for CISCO Huawei Router Switch/Microsoft (HCL) authentication. It is compatible with Windows and does not require a CD, as the driver is part of the operating system distribution.

 

3. Support hardware flow control for implementing Cisco interrupt sequences.

 

4. RJ-45 DTE Pinouts RTS(1)、DTR(2)、TXD (3)、GND(4)、GND(5)、RXD (6)、DSR(7)、CTS(8)

 

5. The pin output may not match other devices because there is no pin connection or standard RS-232 on the RJ45 8-pin modular connector.

 

6. Both 32-bit and 64-bit operating systems are supported

 

Server Router Micro USB to RJ45 Cisco Console Cable


Premier Cable provides Cisco Console cables for video conferencing cameras, switches, routers, servers, firewalls, and other devices that are suitable for RJ45 interfaces, enabling debugging of their models and configuring communication operations. 

 

We provide a variety of different interfaces to meet the needs of different industries: USB-A, USB-C, Micro USB, Mini USB, DB9, DB25, etc. Welcome to leave a message or email for consultation.

 

Switch Firwall DB9 to RJ45 Cisco Console Cable

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.