News Center

Features of CommScope's New 3.5 GHz Series Antennas

www.premier-cable.net


Features of CommScope's New 3.5 GHz Series Antennas

 


In order to increase network capacity and fully embrace the 5G era, CommScope, the world's leading provider of communication network infrastructure solutions, announced the launch of a new 3.5 GHz antenna series suitable for comprehensive and dense coverage of macro and micro cells. With the new series of antennas, users will be able to achieve an increase in current LTE network capacity when deploying new spectrum bands, fully preparing for future 5G networks.

Key features of CommScope's new 3.5 GHz series of antennas include:

1. Provides a variety of single-band and multi-band options (including beamforming) to provide coverage support in the 3.5GHz frequency band for the deployment of macrocell base stations and outdoor microcell base stations.

2. Through carrier aggregation, high-order MIMO, interference management and beam downtilt functions to fully guarantee the efficient application of spectral efficiency.

3. As an important step towards 5G, the antenna can meet future demands while being compatible with LTE and other early radio frequency technologies.

A well-known research company in the United States said: "There are not many radio frequency products such as base station antennas, combiners and tower-mounted amplifiers that support the 3.5 GHz frequency band in the market. However, for operators limited by network capacity, it is suitable for macro cell base stations. 3.5 GHz base station antennas and RF transmission products for outdoor microcell base station deployments are critical.”

With the introduction of the new antennas, the CommScope antenna and filter portfolio has been further expanded to include:

- 2.3GHz Smart Beamforming Sector Antenna for Macrocell Base Stations

- EU-ready, multi-band antennas and combiners supporting 1400 MHz for macrocell base stations

- 65° sector and quasi-omnidirectional microcell base station antennas

- Combiners and Tower Mounted Amplifiers to support 3.5GHz macro and micro cell site deployments  
 
CommScope's senior vice president of mobile solutions said: "The network capacity is now at the edge of the limit, especially in densely populated urban areas, it is difficult to increase, and even can no longer obtain more space to build base stations. CommScope's new 3.5 The GHz antenna features a special antenna design that supports the 3.5 GHz spectrum, providing additional spectral efficiency to expand capacity for overburdened networks."

In the coming months, CommScope will continue to introduce more antennas and combiners for multiple bands. CommScope will showcase its portfolio of mobile network solutions for the 5G era at Mobile World Congress (NWC) from February 25 to 28.

Antenna technology is more difficult in the 5G era, and the industry concentration is expected to be higher than 4G

According to ABI Research data, the current global base station antenna market pattern is stabilizing. The global top 3 antenna manufacturers Huawei, Katherine, and CommScope occupy nearly 70% of the base station antenna market share. In 2020, Huawei occupies the highest market share, reaching 35.1%. Domestic Huawei, Comba Telecom and Tongyu Communication all entered the top ten in the world. The antenna and radio frequency in the 5G era will be integrated, and the trend of providing integrated products by main equipment manufacturers (Huawei, etc.) is obvious. Manufacturers in the antenna industry will gradually integrate and focus on the head.


ATCB-B01-Y-C30  AISG RET Control Cable Two-way Splitter

 


RET Control Cable Assemblies


ATCB-B01-001 AISG RET Control Cable, 1 m
 
ATCB-B01-002 AISG RET Control Cable, 2 m
 
ATCB-B01-003 AISG RET Control Cable, 3 m
 
ATCB-B01-004 AISG RET Control Cable, 4 m
 
ATCB-B01-005 AISG RET Control Cable, 5 m
 
ATCB-B01-006 AISG RET Control Cable, 6 m
 
ATCB-B01-007 AISG RET Control Cable, 7 m
 
ATCB-B01-009 AISG RET Control Cable, 9 m
 
ATCB-B01-010 AISG RET Control Cable, 10 m
 
ATCB-B01-015 AISG RET Control Cable, 15 m
 
ATCB-B01-020 AISG RET Control Cable, 20 m
 
ATCB-B01-025 AISG RET Control Cable, 25 m
 
ATCB-B01-030 AISG RET Control Cable, 30 m
 
ATCB-B01-040 AISG RET Control Cable, 40 m

ATCB-B01-050 AISG RET Control Cable, 50 m

ATCB-B01-060 AISG RET Control Cable, 60 m

ATCB-B01-080 AISG RET Control Cable, 80 m

ATCB-B01-100 AISG RET Control Cable, 100 m

ATCB-B01-C150 AISG RET Control Cable, 1.5 m

ATCB-B01-C50 AISG RET Control Cable, 0.5 m

 

 


ATCB-DB15-003 RET control cable 3m with male DB15 and female AISG connector

ATCB-DB15-005 RET control cable 5m with male DB15 and female AISG connector

ATCB-DB15-010 RET control cable 10m with male DB15 and female AISG connector

ATCB-DB15-020 RET control cable 20m with male DB15 and female AISG connector

 

ATCB-DB9-001 RET control cable with male DB9 which has 4-40 screws and female AISG connector

ATCB-DB9-002 RET control cable with male DB9 which has 4-40 screws and female AISG connector

ATCB-DB9-003 RET control cable with male DB9 which has 4-40 screws and female AISG connector

ATCB-DB9-003-A RET control cable 3m with overmolded male DB9 and female AISG connectors

ATCB-DB9-005 RET control cable with male DB9 which has 4-40 screws and female AISG connector

ATCB-DB9-006 RET control cable with male DB9 which has 4-40 screws and female AISG connector

ATCB-DB9-006-A RET control cable 6m with overmolded male DB9 and female AISG connectors

ATCB-DB9-010 RET control cable with male DB9 which has 4-40 screws and female AISG connector

ATCB-DB9-020 RET control cable 20m with male DB9 and female AISG connector

ATCB-DB9-025-A RET control cable 25m with overmolded male DB9 and female AISG connectors

ATCB-DB9-045 RET control cable 45m with male DB9 and female AISG connector


ATCB-DB9-060 RET control cable with male DB9 which has 4-40 screws and female AISG connector

 

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.