News Center

The function characteristic of the new cable from FTDI USB


The following paragraph of this article will introduce the function characteristic of the new cable from FTDI USB.

FTDI USB's new cable can be used to provide selectable from 1.8V to 5.0V power output to power external circuits.

FTDI USB for sale

The FTDI USB data cable integrates FTDI's USB2.0 to UART converter chip FT232R and related circuits in the USB connector of the data cable. This cable from FTDI USB has the complete USB protocol inside the control device—that is, the user does not need to know the USB protocol.

The UART interface of this data cable from FTDI USB supports data transfer at the fastest 3Mbps. Using the FTDI USB's Virtual Serial Port (VCP) driver, users can easily treat the UART interface as a virtual COM port that can be accessed by existing software applications without redesigning. The D2XX driver for FTDI USB also supports application development using high-level software languages.

Through the above introduction and analysis of the function characteristic of the new cable from FTDI USB, hope it helps you.

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.