News Center

rs232 to rs422 converter manufacturer will take you to understand: USB to RS232 serial cable installation problem

The rs232 to rs422 converter manufacturer tells you that most of the notebook computers have cancelled the COM port and replaced it with a USB interface. USB has been widely used due to its plug-and-play characteristics and high-speed data transfer rate.

Low price rs232 to rs422 converter from China manufacturer
I recently learned PLC programming, but my laptop has no RS232 serial port, what should I do? The manufacturer of rs232 to rs422 converter tells you that it’s okay. Let’s take a USB to RS232 serial port, but after installing the driver, it can’t be used. The problem reappears: When I want to connect to the PLC, I always say that the USB connection is wrong. I use the serial port to connect to other computers directly. The host can be used, but the USB-232 cable connection will not work.
The manufacturer of rs232 to rs422 converter tells you that in many notebooks, the serial port is not a standard configuration. Sometimes when the communication port is required in the project, the USB to 232 serial cable is often used. The rs232 to rs422 converter manufacturer tells you that there is no problem in normal installation. Poor quality serial port cables may sometimes be interrupted during the communication process, and sometimes be disturbed. But generally there is no connection failure. Pay attention to the following installation process:
1. The manufacturer of rs232 to rs422 converter tells you whether the driver is installed correctly, check the status of the driver file of the USB cable in the device manager.
2. The manufacturer of rs232 to rs422 converter tells you to confirm whether the interface setting is consistent with the actual setting. If the actual interface is COM3, but you choose COM1, or the communication speed and other setting problems.

Related News

What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.

CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.

Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.

Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."

What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.

The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.