News Center

The difference between RJ45 and RJ48

www.premier-cable.net


The difference between RJ45 and RJ48

 


RJ45 and RJ48 are similar in appearance and structure, both are 8-pin positions, and the applications are different.

 

RJ45 is used for Ethernet (10/100/1000/10G UTP/STP) interface, which is the network cable interface on our usual computers, routers, etc.

 

Usually 10/100M Ethernet uses (1-2) (3-6) pins, and 1000M/10G Ethernet uses (1-2) (3-6) (4-5) (7-8) pins .

 

RJ48 is used for T1, E1 serial lines, using shielded twisted pair cables, commonly RJ-48C and RJ-48S. The pins used are (1-2) (4-5), and occasionally some (3-6) are connected to SHIELD/GND/RETURN.

 


RJ45 and RJ50 Cable

 

RJ45 and RJ48 Cable


 
RJ48 RJ50 10P10C Cable

RJ48 RJ50 10P10C CableRJ45 and RJ48 CableRJ45 and RJ50 CableRJ45 and RJ48

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.