Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
News Center
Features and application of USB to CAN card
Publish:
2022-07-24 23:56
Source:
www.premier-cable.net
Features and application of USB to CAN card
Introduction to USB to CAN Card
The USBCAN-II Pro model is a universal USB to CAN card. This model analyzer has "three highs" - high quality, high cost performance, and high stability.
Users can use this type of USB to CAN card to develop, test, manage, maintain CAN network, record, send and receive, and analyze bus data.
USB to CAN card can realize CAN bus two-way data transmission, dedicated industrial-grade high-speed 32-bit CPU, receiving and sending speed is greater than 8000 frames per second.
USB to CAN card hardware device features overview :
Comply with ISO 11898 standard, support CAN 2.0A/B, standard frame/extended frame/data frame/remote frame four-layer immersion gold process circuit board, enhance USB interface overcurrent protection and enhance CAN bus EMI anti-interference ability, the product passes CiA requirements Electromagnetic interference test test to improve the stability of the entire system.
The production process is strictly controlled with high standards. All components adopt the industrial-grade original new embedded real-time operating system of internationally renowned brands. The firmware program can be upgraded remotely. Users can remotely upgrade the chip firmware program by themselves. One machine can be used permanently.
The hardware equipment uses pure aluminum alloy shell, which is stable and anti-interference, and the terminal connector is convenient for debugging.
Industrial-grade main chip, magnetic coupling isolation at the CAN end, isolates the high-voltage common mode signal on the bus, improves operation stability and increases service life. 3×24 hours full load transceiver test, no frame loss.
Increase the GND and PE interfaces, which can improve the stability when the environmental interference is serious and the bus data is interfered. The product driver has passed the Microsoft digital signature certification, and can be operated in 32/64 bits such as win 98/xp/2000/2003/7/8 used on the system.
Plug and play, convenient and durable, suitable for on-site debugging and analysis to detect network status.
Application fields of USB to CAN card :
CAN message detection and monitoring CANOPEN PLC control CANOPEN signal sending and receiving FCS system based on CANBUS with remote I/O system
USB to CAN card quality advantages :
This type of USB to CAN card is an industrial-grade standard and can be used in relatively harsh field environments. It has high requirements for anti-interference ability and high temperature range, generally -45 degrees to +80 degrees.
Premier Cable CO LTD is a cable factory with 400 workers, we also make USB serial cable , USB to RS232 RS485 cable, OEM Cable and Wire Harness
For different application, we also make the DB9 connector and RS232 Cable angled, like right angle RS232 Cable, left angle RS232 Cable, up angle RS232 Cable, down angle RS232 Cable
Welcome to your inquiry or visit our Website : www.premier-cable.net
Our cables can be used for below industry or applications :
CAN-USB card
RS232 to CAN
CAN232 Converter
CAN bus protocol
CANopen protocol
RS232 RS485 to CAN
Serial port to CAN module
PEAK PCAN-USB IPEH-002021
CANbus bus converter gateway
CANopen Industrial Communication
Serial port RS232/485/UART to CANbus
RS232CAN Network Intelligent Data Conversion
Tel : 0086-0139-2949-7934
Skype : james198585
Email : James@premier-cable.net
Email : sales@premier-cable-mfg.com














Related News
10M Quad MATE-AX & HFM Mini FAKRA 4-in-1 Cable Assemblies Now Available – Stock Ready, No MOQ
The 10M Quad MATE-AX & HFM Mini FAKRA 4-in-1 Cable Assemblies is ideal for connecting cameras, sensors, radar modules, area controllers, and domain control units in modern vehicles, buses, coaches, passenger buses, trucks, and commercial transportation systems.
7/8" Power Cable Solution for AGV and AMR Robotics Applications
Premier Cable’s DeviceNet 7/8" power cables for AGV and AMR robots, deliver the stability, durability, and flexibility required for next-generation robotic systems. Start Your Custom Cable Project Today! Get reliable power solutions for your AGV or AMR system!
GMSL Camera Cables Solution for Automotive In-Vehicle Developer System and Robotic
Looking for reliable and customizable GMSL camera cables? Premier Cable provide GMSL, GMSL2, and GMSL3 camera cable with Fakra and Quad Fakra, customizable for NVIDIA DRIVE AGX Thor Developer Kit, automotive, unmanned vehicles, robotics, AMR, and smart cities.
Premier Cable MATE-AX & H-MTD GMSL Ethernet Cable for NVIDIA DRIVE AGX Thor Developer Kit
Premier Cable provide custom MATE-AX & H-MTD breakout cables for NVIDIA DRIVE AGX Thor, supporting humanoid robots, machine vision, Industrial Vehicles, Robotics, and Autonomous Machines.
How H-MTD Cable Empower Robotaxi and Autonomous Driving Systems
H-MTD cable assemblies enable high-speed automotive Ethernet for Robotaxi, supporting cameras, LiDAR, and ADAS with customizable solutions.
Premier Cable Launches TE 282762-1 2 Way Automotive Cable Assembly
Premier Cable introduces the TE 282762-1 AMP Junior Power Timer automotive wiring harness, customizable, and widely used in sensors, fuel injection, ignition systems, and turn signals.