News Center

Serial port RS232/485/UART to CANbus bus converter gateway CSM100 module CANCOM

Serial port RS232/485/UART to CANbus bus converter gateway CSM100 module CANCOM


CANUART-100T series intelligent bidirectional UART to CAN module has one TTL UART serial channel and one CAN channel, which realizes the intelligent conversion of bidirectional data between CAN and serial UART.


The ultra-small potting module design is convenient for users to integrate into the circuit board and quickly expand the CAN channel through the UART port of the MCU.


CAN channel adopts Jinshengyang power module and signal isolation chip to achieve 2500VDC electrical isolation, power input anti-reverse design, support DC6.5~36V input;


Has excellent EMC performance, reliability test items: ESD contact discharge 8KV, surge ±1KV, pulse group ±2KV, industrial grade 4, in line with CE-EMC, IEC/EN61000-4-2/4/5 standards;


The intelligent two-way UART to CAN module provides three conversion modes of "transparent conversion, transparent band mark conversion and custom protocol conversion", supports the mutual conversion between any serial port data and CAN frames; supports CAN frame acceptance filter settings.


Product Features



﹂ Ultra-small potting module

﹂ Support the mutual conversion between any serial port data and CAN frame


﹂ Quickly expand the CAN channel through the UART port of the MCU.


﹂ Support transparent, transparent with logo and custom protocol conversion mode


﹂CAN baud rate supports 40Kbps~1Mbps, can be set arbitrarily


﹂ Serial port baud rate supports 600~921600bps

﹂ Compliant with CAN 2.0A/2.0B specification and ISO/DIS 11898 standard


﹂CAN interface isolation voltage up to 2500VDC


﹂ Configure parameters through the USB interface of the evaluation board or the CAN interface of the module


﹂ Receive or send data conversion capability 4000 frames/s


﹂ Support rich CAN frame acceptance filter settings


﹂ 5V, 3.3VDC power input optional, maximum 70mA/5V


﹂ Working temperature: -40℃ to +85℃


﹂CAN interface anti-surge, anti-burst, ESD protection design


Premier Cable CO LTD is a cable factory with 400 workers, we also make USB serial cable ,  USB to RS232 RS485 cable, OEM Cable and Wire Harness


For different application, we also make the DB9 connector and RS232 Cable angled,  like right angle RS232 Cable, left angle RS232 Cable, up angle RS232 Cable, down angle RS232 Cable


Welcome to your inquiry or visit our  Website :


Our cables can be used for below industry or applications :


RS232/422/485 TO USB Converter

RS-232/422/485 to CAN Converter

RS232 RS485 to CAN BUS  Converter  

USB Can Bus OBD Diagnostic Interface

Industrial CAN-bus communication card

RS232 to CAN BUS converter Serial Port

PCAN-USB Adapter PC to CAN Bus Interface


Tel : 0086-0139-2949-7934

Skype : james198585 


Email :

Email :



Related News

What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.

CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.

Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.

Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."

What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.

The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.