News Center

How to use RS232 to CAN converter

www.premier-cable.net


How to use RS232 to CAN converter  

 

 
RS232 to CAN converter is an industrial gateway device, which can realize the mutual conversion between CAN bus data and 232 data, so that devices that originally only integrated with 232 interface can also be connected to the CAN bus for use, improving the work of the device efficiency 

 

 
At least one CAN bus interface and one 232 interface are integrated, and there is a special power interface, which can be powered by an external power supply of 9-24V. When using the RS232 to CAN converter, we should pay attention to several issues:

 

1. What is the conversion direction of the data, is it only from the CAN side to the serial port, or only from the serial port to the CAN side, or both sides are turned together.

 

2. Should the filter be set before the device is used. If the data is transferred from the 232 end to the CAN end, it is not necessary, if not, it must be, otherwise the frame may be lost.

 

3. What is the form of data conversion, whether it is transparent transmission, transparent band logo, or format conversion.

 

Of course, the issues to be aware of are not limited to these, now you know? Welcome to discuss with me.

 


Premier Cable CO LTD is a cable factory with 400 workers, we also make USB serial cable ,  USB to RS232 RS485 cable, OEM Cable and Wire Harness

 

For different application, we also make the DB9 connector and RS232 Cable angled,  like right angle RS232 Cable, left angle RS232 Cable, up angle RS232 Cable, down angle RS232 Cable

 

Welcome to your inquiry or visit our  Website : www.premier-cable.net

 

Our cables can be used for below industry or applications :

 

OBD CAN Bus analyzer


RS232 to CAN converter


USB to CAN bus analyzer


USB to CAN bus converter


PEAK-System CAN interface 


PEAK PCAN-USB IPEH-002022


RS-232/422/485 Data Gateway 


USB CAN and CAN FD interface 


USB Diagnostic Interface CANBUS

 


Tel : 0086-0139-2949-7934
 


Skype : james198585 

 

Email :  James@premier-cable.net
 


Email :  sales@premier-cable-mfg.com

 


 

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.