News Center

Motorola Programming Cable RS232 RJ45 manufacturers take you to understand the cause of cable failure


1. The Faulty cable connector can cause cable failure. The Motorola Programming Cable RS232 RJ45 Manufacturers tell you that the cable joint is the weakest link in the cable line, and the cable joint failure is caused by the direct fault of the personnel, such as poor construction, which often occurs.

low price Motorola Programming Cable RS232 RJ45
The Motorola Programming Cable RS232 RJ45 Manufacturers tell you that in the process of making cable joints, if there are reasons such as insufficient joint crimping and insufficient heating, the insulation of the cable head will be reduced, resulting in accidents.
2. The ambient and temperature can cause cable failure. The Motorola Programming Cable RS232 RJ45 Manufacturers tell you that the external environment and heat source where the cable is located will also cause the cable to overheat, break down the insulation, and even explode and catch fire.
The above is the Motorola Programming Cable RS232 RJ45 manufacturer's introduction and analysis of the cause of cable failure, hope it helps you.

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.