News Center

What are the solar panels of a portable power station?

www.premier-cable.net


Portable power station is composed of three parts: solar panels, special storage batteries and standard accessories. The first two are the key to the quality and performance of the product of the power supply, and should be considered in the selection process.

 

Portable Power Station Solar Panel XT30 XT60 XT90 Cable


Solar panels


There are three types of solar panels on the market, including monocrystalline silicon solar panels, polycrystalline silicon solar panels and amorphous silicon solar panels.


Monocrystalline silicon solar cells are the more commonly used semiconductor cells for the production of solar power. Its production process has been finalized, and its stability and photoelectric conversion rate are high.
However, because the cost is too expensive, the monocrystalline silicon solar cells on the market, the conversion rate are between 15%-18%.


Polycrystalline silicon solar cells are less expensive than monocrystalline solar cells, better light sensitivity, in the sun and incandescent light can be sensitive to light. But the photoelectric conversion rate is only 11%-13%. With the development of technology, the efficiency is also improving, however, compared to the efficiency of monocrystalline silicon is still slightly inferior.


Amorphous silicon solar cell conversion rate is the lowest, the international advanced level is only about 10%, and is not stable, there is often a sudden drop in conversion rate phenomenon. Therefore, amorphous silicon solar cells are mostly used for weak light sources, such as solar-powered electronic calculators, electronic clocks and other aspects. Although the price is low, the cost performance is not high.


Overall, the choice of portable solar power, or to monocrystalline silicon and polycrystalline silicon, it is best not to be greedy for cheap and choose amorphous silicon.

 

Solar Generator Solar Panel Home Emergency Power Supply GX16 Anderson MC4 Cable


In addition, qualified protable power station battery will have overcharge overload, overvoltage overcurrent protection function, the battery will automatically shut down after a full charge no longer charged, discharge to a certain level will also automatically cut off power to protect the battery and power equipment.


Premier Cable is an 18-year+ harness assembly manufacturer, providing one-stop wire harness solutions for solar panel power and BMS management solutions for Solar Energy System, Solar Lights Outdoor, Solar Generator, Solar Inverter, Solar Power Bank, etc. Welcome to inquire by email: sales05@premier-cable.net

 

Solar Powered Generator LED Light Anderson DC7909 DC8MM Cable

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.