News Center

Various uses of Radio Programming Cable


Radio Programming Cable is a type of wireless communication technology that focuses on the use of software means to replace the hardware in the radio system to perform tasks such as signal processing. Because the programming method of Radio Programming Cable is used to realize many hardware functions, this scheme has high flexibility and has been popularized in the early 21st century, and is used in various wireless communication fields.

Radio Programming Cable prices

The hardware of Radio Programming Cable can start with some TV sticks. A popular TV stick based on Realtek chip, which can receive DVB-T digital TV broadcasts, is itself one of the cheapest software radio receivers. With suitable computer software, a lot of work can be done with this Radio Programming Cable and TV stick, such as:

Using Radio Programming Cable to receive DVB-T television broadcasts (original purpose), listen to frequency modulation (FM) radio broadcasts, including analog and digital broadcasts, listen to shortwave (SW) radio broadcasts;
Use Radio Programming Cable to receive real-time cloud images sent by weather satellites on 138MHz, receive and decode the values ​​of various household weather sensors on 433MHz, receive aircraft ADS-B position reports on 1090MHz, and receive weather satellite transmissions in geostationary orbit near 1700MHz high-definition cloud map;


Radio Programming Cable uses radio to monitor meteors through broadcast frequencies or other strong signal sources in other cities;
Using multiple SDR collaborations, Radio Programming Cable can even design passive phased array radars to determine the position and velocity of radio-reflecting targets, both man-made and natural
Of course, to achieve these goals, not only a set of software radio equipment is required, but also a certain understanding of antennas and electromagnetic wave theory.

Through the above introduction and analysis of Radio Programming Cable, hope it helps you.

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.