News Center

Brief introduction of DC Panel Mount Cable


DC Panel Mount Cable is a power cable used in DC power transmission and distribution systems. The structure of DC Panel Mount Cable is basically the same as that of AC cable except that the electrical characteristics of operation are different from AC. DC Panel Mount Cable is mainly used for long-distance submarine cable lines.

Cheap DC Panel Mount Cable Manufacturers china
The DC power transmission and distribution system usually runs on two wires (positive and negative), so the DC Panel Mount Cable is generally a single-core cable. Because the conductors of the DC Panel Mount Cable have no skin effect and proximity effect, it is not necessary to use a complex split conductor structure even if a large current is transported. The insulation of the DC Panel Mount Cable can be the same as that of the oil-impregnated paper insulated cable, the solid extruded polymer cable, the self-contained oil-filled cable, and the gas-filled cable, and the armor layer does not need to be considered because it is not affected by the conductor current. Layer loss and measures to reduce armor resistivity.
The maximum field strength of the AC cable is always close to the insulation layer on the conductor surface, while the electric field strength of the DC Panel Mount Cable is proportional to the resistivity of the insulation. The resistivity of the insulation changes with temperature, that is, the insulation layer. The maximum electric field strength in is not only related to the applied voltage, but also to the load. When there is no load, the maximum electric field strength is at the surface of the cable conductor. When the load increases, due to the higher temperature near the conductor, the insulation resistivity decreases, the electric field strength on the conductor surface decreases, and the electric field strength on the insulating surface gradually increases. Therefore, the maximum allowable load of the DC Panel Mount Cable should not make the electric field strength on the insulating surface exceed its allowable value, that is, not only the maximum working temperature of the cable, but also the temperature distribution of the insulating layer should be considered.
Another feature of the DC Panel Mount Cable is that the insulation must be able to withstand rapid polarity reversals. The polarity reversal under load will cause an increase in the electric field strength within the insulation, usually by 50% to 70%.

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.