News Center

Termination resistance

www.premier-cable.net


Termination resistance is an obstacle encountered in the transmission process of electronic information.

 

When high-frequency signals are transmitted, the signal wavelength is shorter than that of the transmission line, and the signal will form a reflected wave at the end of the transmission line, which will interfere with the original signal. Therefore, it is necessary to add a terminal resistance at the end of the transmission line so that the signal does not reflect after reaching the end of the transmission line.

 

Not for low frequency signals. In long-line signal transmission, in order to avoid signal reflection and echo, it is also necessary to connect a terminal matching resistor at the receiving end.

 


The purpose of matching terminating resistors is to minimize the reactance of the LR or CR circuit, while the overall performance is impedance rather than inductive or capacitive.

 


Premier Cable CO LTD,  www.premier-cable.net , is a cable factory based in China, we mainly make CAN Termination resistors, plugs and cables , IOT related cables

 

Our cable and adapters are fully 100% compatible with PEAK-System ,  IXXAT , Kvaser , HMS, CSS Electronics

 


We make : 

 


CAN-T Adapter

CAN Bus Cable 

CAN Lin Cable 

CAN Adapter Cable

Null modem crossover cable
 


DB9 to 9-Pin Terminal Block Adapter 

D-sub 9 pin 120 Ohm termination adapter

CAN Termination resistors, plugs and cables
  
 

Skype : james198585 

 

Email :  James@premier-cable.net


 
Email :  sales@premier-cable-mfg.com 

 

CAN Lin Adapter Cable CAN Bus plug and cable   CAN Termination resistor CAN Lin Cable

Related News


10M Quad MATE-AX & HFM Mini FAKRA 4-in-1 Cable Assemblies Now Available – Stock Ready, No MOQ

The 10M Quad MATE-AX & HFM Mini FAKRA 4-in-1 Cable Assemblies is ideal for connecting cameras, sensors, radar modules, area controllers, and domain control units in modern vehicles, buses, coaches, passenger buses, trucks, and commercial transportation systems.


7/8" Power Cable Solution for AGV and AMR Robotics Applications

Premier Cable’s DeviceNet 7/8" power cables for AGV and AMR robots, deliver the stability, durability, and flexibility required for next-generation robotic systems. Start Your Custom Cable Project Today! Get reliable power solutions for your AGV or AMR system!


GMSL Camera Cables Solution for Automotive In-Vehicle Developer System and Robotic

Looking for reliable and customizable GMSL camera cables? Premier Cable provide GMSL, GMSL2, and GMSL3 camera cable with Fakra and Quad Fakra, customizable for NVIDIA DRIVE AGX Thor Developer Kit, automotive, unmanned vehicles, robotics, AMR, and smart cities.


Premier Cable MATE-AX & H-MTD GMSL Ethernet Cable for NVIDIA DRIVE AGX Thor Developer Kit

Premier Cable provide custom MATE-AX & H-MTD breakout cables for NVIDIA DRIVE AGX Thor, supporting humanoid robots, machine vision, Industrial Vehicles, Robotics, and Autonomous Machines.


How H-MTD Cable Empower Robotaxi and Autonomous Driving Systems

H-MTD cable assemblies enable high-speed automotive Ethernet for Robotaxi, supporting cameras, LiDAR, and ADAS with customizable solutions.


Premier Cable Launches TE 282762-1 2 Way Automotive Cable Assembly

Premier Cable introduces the TE 282762-1 AMP Junior Power Timer automotive wiring harness, customizable, and widely used in sensors, fuel injection, ignition systems, and turn signals.