News Center

What are the precautions for the use of SMB Cable


SMB Cable is a part used to conduct radio waves. When this part is installed on other equipment or machines, it can make the machine and equipment become more stable when receiving radio waves, and the equipment will not work properly. It also improves the efficiency of people and the safety and stability of the machine, but there are many aspects of SMB Cable that need to be treated with care during the use.

customized SMB Cable from China manufacturer
1. Prevent it from being placed in a humid environment
SMB Cable inventory At that time, people need to carefully store SMB Cable in a clean and dry place for storage or preservation, because if the SMB Cable is placed in a humid environment when the connector is not used, the metal material on the surface may be possible. There will be rust, and once the surface is rusted, installing this product on other equipment will affect the overall effect.
2. Do not wear the surface
In the process of using SMB Cable, people should be more careful rather than arbitrarily to make the surface wear, because when a piece of equipment wears, it will inevitably affect the subsequent use effect and if the surface of SMB Cable wears, then The efficiency will also be lower when receiving the conducted waves, which makes the operating conditions of the entire equipment poor.
3. Regular maintenance and inspection, even if the SMB Cable with better material is used, people still have to go to many inspections and maintenance during the use process, because the long-term use of the connector will be aging, etc., if the equipment or parts can be regularly changed Applying engine oil on it can prevent the SMB Cable from aging and help people reduce the number of replacements and costs.
When you understand the above three aspects about SMB Cable in the use of applications, people should pay more attention and be careful in the places where you can know that when SMB Cable is not used, it should be placed in a dry and safe environment for storage. It is not placed in a humid place close to the water source to cause rust on its surface. After installation, the SMB Cable also requires regular inspection and maintenance to prevent the use of damaged connectors from affecting the entire device.

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.