News Center

IEC 60130-9 standard

IEC 60130-9 standard


Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment


Steckverbinder fur Frequenzen unter 3 MHz Teil 9: Rundsteckverbinder fur Rundfunk-und verwandte elektroakustische Gerate IEC 60130-9:2000 

Compliant with IEC 60130-9 standard, the number of contact cores is 3 to 8;


Mainly used for signal control of AISG smart antenna;


Comply with RoHS environmental protection requirements;


Good EMI shielding performance;


Good protection performance (IP67);


The plug (free end of the cable) has both a pin type and a hole type;


The socket (panel fixed end) has both pin type and hole type;


The socket fixing method includes both square plate flange installation and round nut fastening installation;


Pin and hole termination methods include wire welding and crimping.


Premier Cable is a factory based in Dong Guan City to make antenna cables


We make  :


IEC 60130-9 Cable

IEC 60130-9 standard


IEC 60130-9 Connector


IEC 60130-9 wire harness


IEC 60130-9 cable assembly


IEC 60130-9 Circular Connector


Tel : 0086-0139-2949-7934


Skype : james198585 


Email :


Email :

Related News

What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.

CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.

Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.

Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."

What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.

The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.