News Center

EtherCon RJ45 Connector

EtherCon RJ45 Connector


These EtherCon RJ45 connectors from Neutrik feature plugs housed in die-cast housings that lock and interlock with corresponding receptacles in the same manner as typical XLR connectors.


This will ensure that the EtherCon RJ45 plugs and receptacles can form a robust and secure fitting, not usually provided by a typical RJ45 connection.


Features and Benefits


All are Category 5 compliant (IDC models Category 5e) and are compatible for use with 10 Base-T and 100 BaseTX systems "FDV" models use similar front flanges as Neutrik unified XLR connectors


Maximum cable outer diameter is 6 mm


Cable Mounting Enclosure Fits Existing Rugged RJ45 Cables


Frequency Bandwidth: 1 MHz to 100 MHz


Rated current: 1.5A


Dielectric Strength: 1kV AC


Contact resistance: <10 mΩ


Insulation resistance: >500 mΩ


Temperature range: -30° to + 80°C


Estimated mechanical life: >1000 cycles


Premier Cable is a factory based in Dong Guan City to make Audio cables 


We make  ETHERCON  Cable, EtherCon RJ45 plug, Neutrik etherCON RJ45, ETHERCON CONNECTOR,  See more at 


Tel : 0086-0139-2949-7934


Skype : james198585 


Email :


Email :

Related News

What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.

CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.

Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.

Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."

What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.

The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.