News Center

Waterproof TYPE-C connectors in the industrial field

www.premier-cable.net


Waterproof TYPE-C connectors in the industrial field

 

With the deepening of platform applications, the requirements for the applicability and robustness of the existing USB connectors are also further deepened. Because the older designs cannot meet the new requirements, the USB connectors have a large demand in the market. Diversification, the changing environment of use, especially the growing demand for waterproof USB connector products, this is because traditional USB solutions have been unable to meet the needs of consumer market products. The requirements are greater, the power demand is also increasing, and it is required to be used in more environments, and the USB type-c waterproof connector is a good solution to this problem.

 


The design requirements of waterproof USB type-c connectors can be summed up in three aspects: signal integrity, power consumption, and environmental protection

 


1. Signal integrity requirements Higher signal integrity is equivalent to faster data rates, so it is the best policy to choose USB Type-C connector products with brand new signal integrity. In some cases, connector manufacturers can offer 10Gbps throughput based on experience with previous data products.​

 

2. Power consumption requirements Because USB Type-C connector products can transmit up to 100W of power at normal current, while Micro USB systems can transmit 10W at normal current. Therefore, USB Type-C connector products charge faster and require greater power consumption.​

 

3. Environmental protection requirements In order to provide the environmental protection required by users, waterproof USB Type-C connectors need to have rubber seals and seamless shells to be waterproof, and these connectors should have IPX8 waterproof performance (according to IEC 60529), And should be durable enough for thousands of mating cycles. Often added board retention features contribute to a robust design of the waterproof USB Type-C connector and provide high reliability and quality.

 

Waterproof TYP-C connectors enable new and exciting device specifications (size, industrial design, style...), and can seamlessly interface with existing USB devices and solutions, so waterproof TYP-C connectors It is widely used in many fields of industry.

 

Premier Cable make Waterproof cables for more than 15 years,  all the cable pass IP67 waterproof standard test, our cables like :  IP67 USB 3.1 Type C Cable , USB-C IP67 Waterproof Cable , USB TYPE-C IP67 TO USB A 3.0 Cable , USB Sealed Connector, USB Type C, USB 3.1, IP67
 
For more products info, please kindly go to https://www.premier-cable.net/product/IP67-Waterproof-Cable--13
  
If you need product details, drawings, and samples, you can use below contact info : 


Skype : James198585 

 
Wechat : 13929497934
 

James@premier-cable.net

 
sales@premier-cable-mfg.com

 

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.