News Center

RS232 Serial Cable With RJ12 Connector manufacturers take you to understand the subsequent installation process of the cable connector


1. RS232 Serial Cable With RJ12 Connector Manufacturers tell you that use a copper brush to clean the cable connector. In general, the copper powder in the cable connector and the sheath of the cable should be cleaned up. Prevent short circuits or dangerous situations from occurring.

RS232 Serial Cable With RJ12 Connector suppliers China2. RS232 Serial Cable With RJ12 Connector Manufacturers tell you that connect the internal conductor components, external lightning protection components, and internal components of the cable connector accordingly. At this time, the installation must be accurate (that is, the installation sequence should also be carried out in the above order).
3. RS232 Serial Cable With RJ12 Connector Manufacturers tell you that install the inner card slot on the cable connector, and finally inflate it, be sure to charge a certain amount of dry gas. Just keep the air pressure above 90%.
The above is the RS232 Serial Cable With RJ12 Connector manufacturer's introduction and analysis of the subsequent installation process of the cable connector, hope it helps you.

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.