News Center

What is Tube microphone ?

What is Tube microphone ? 


The amplifier uses a condenser microphone with a tube, which has a wider, more delicate, clearer, and more rounded tone, with rich bass, clear midrange, and bright and transparent treble. 


It is widely used in recording studios, radio station stage performances Professional occasions such as post-production in film and television works


Tube microphone features


Double-sided large-diaphragm sound head.

Selected vacuum tubes are used.

U-transformer output.

Low noise and wide dynamic range.

Unique and novel appearance design.
Tube Microphone Environmental Requirements
The highs of the tube mic are smoother, with plenty of air, and a coloration that quite a few people like, and the soft, slightly muffled sound is beautiful, albeit with less detail and layering. Different types of microphones require different environments.

1. The directional microphone has relatively low requirements on the environment, and generally has relatively small noise, but the sound quality is not good enough, so it is generally not recommended.

2. Electron tube microphones have high sensitivity and relatively high environmental requirements. The room needs special treatment and sound insulation.

3. The sound of the tube microphone is warm and comfortable to listen to, but it needs to be warmed up, otherwise it will be difficult to play its advantages.

4. The noise reduction in the later stage should not be too "sharp", otherwise it will be seriously distorted and affect the effect.

Tube Microphone Instructions

1. When using, you should first adjust the volume control of the amplifier or mixer to the minimum, then connect the phantom power supply to the microphone, then turn on the power switch of the phantom power supply, and slowly adjust the volume from small to large to an appropriate level. so as not to be impacted by the speaker.

2. Cover the head of the microphone with your hand, or place the microphone close to the speaker, which may cause whistling. In this case, first reduce the volume, keep the distance from the speaker, and try to keep the microphone away from the speaker.

3. The microphone has high sensitivity, and care must be taken not to drop it from a high place or give it a strong impact.

4. When the microphone is not in use, it should be stored in a dry and clean place. Avoid storage or use in places with high temperature and humidity, so as not to affect the sensitivity and tone.

Tube microphone Brand


AKG Tube Microphone Cable

ART Tube Microphone Cable

Audio-Technica Tube Microphone Cable

Avantone Tube Microphone Cable

Beyerdynamic Tube Microphone Cable

Blue Microphones Tube Microphone Cable

Brauner Microphones Tube Microphone Cable

Chandler Limited  Tube Microphone Cable

Golden Age Tube Microphone Cable

Lauten Audio  Tube Microphone Cable

Lewitt  Tube Microphone Cable

Manley Reference Cardioid Tube Microphone Cable

Marantz Professional Tube Microphone Cable

Microtech Gefell Tube Microphone Cable

Mojave Audio Tube Microphone Cable

MXL Tube Microphone Cable

Nady Tube Microphone Cable

Neumann Tube Microphone Cable

Oktava Tube Microphone Cable

Rode Tube Microphone Cable

Retrosonic Pro Audio Tube Microphone Cable

sE Electronics Tube Microphone Cable

Sennheiser Tube Microphone Cable

Shure Tube Microphone Cable

Sontronics Tube Microphone Cable

Sony Tube Microphone Cable

Soyuz Tube Microphone Cable

Telefunken Tube Microphone Cable

Tonelux Tube Microphone Cable

TZ Stellar Tube Microphone Cable

Warm Audio Tube Microphone Cable


Tube Microphone Cable


7 Pin Canon Audio Cable

Microphone Cable 7 Pin 

7 Core Tube Microphone Cable 

Vacuum Tube Microphone Cable

7 Pin XLR Tube Microphone Cable

Tube Condenser Microphone Cable

7 Pin XLR male to female Extension Cable

Large-diaphragm Tube Condenser Microphone Cable
7 Pin XLR Female to Male Vacuum Tube Microphone Cable  





Related News

What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.

CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.

Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.

Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."

What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.

The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.