News Center

Motorola Programming Cable RS232 RJ45 manufacturers take you to understand how to store cables


Motorola Programming Cable RS232 RJ45 manufacturers tell you that if the cable is to be stored for a long time, depending on where the cable is placed, the following considerations should be made:
1. Cables should be placed under the eaves. Motorola Programming Cable RS232 RJ45 manufacturers tell you that the cable cannot be directly exposed to sunlight or used at super high temperatures. Motorola Programming Cable RS232 RJ45 manufacturers tell you that standard LAN cable can be applied, it is recommended to wrap the cable with conduit.

Motorola Programming Cable RS232 RJ45 suppliers China

2. On the outer wall. Motorola Programming Cable RS232 RJ45 manufacturers tell you that avoid direct sunlight on the wall and man-made damage to the cable.

3. Pipes (plastic or metal). Motorola Programming Cable RS232 RJ45 manufacturers tell you that if the cable is in the pipe, pay attention to the damage to the plastic pipe and the heat conduction of the metal pipe.


The above is the Motorola Programming Cable RS232 RJ45 manufacturers' introduction and analysis of how to store cables, hope it helps you.

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.