News Center

Marine wire and cable (tinned copper)

www.premier-cable.net


 

M12 A coding cable

 

 

Marine wire and cable may also be listed as tinned cable and wire. Copper conductors usually have a tin coating, which causes the stranded wire to be called "tinned copper." Tinned copper marine cables are designed to reduce corrosion and prevent electrical failures.

 

 

Marine cable wire (tinned copper) can be used in marine applications up to 105°C, internal wiring of electrical equipment and general circuit wiring. It is used for electrical connections in marine conditions where tinned conductors are preferred. Tinned copper marine cable performs well in all marine conditions, even in salt water.

 

 

Premier Cable supplies a comprehensive range of marine & offshore cable for use shipboard wiring. Our marine cables are designed to perform in extremes of temperatures, both high and low, and to be resistant to adverse elements such as humidity, oil, acid, muds and salt water, as are prevalent in most marine and offshore operational environments.

 

 

NMEA 2000 Female TerminatorNMEA 2000 TerminatorM12 Micro-C Rear Mount Wired 5-Pin

 

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.