News Center

Is Servo Motor and Servo the Same Thing?

premier-cable.net


Servo motor and servo driver are the two main components of a servo system. The servo motor serves as a power source, and the servo driver controls the parameters such as rotational speed, position, and torque of the motor. Let's follow Premier Cable to learn more about it.

 

Mitsubishi J2S high-power servo encoder cable MR-JHSCBL


Servo Motor

 

Servo motor is a high-performance motor that has higher torque accuracy, lower inertia, and faster response speed compared to ordinary motors. The servo motor is usually powered by a three-phase AC power supply, and its parameters such as rotational speed, position, and torque can be accurately controlled by a servo driver.

 


Servo Driver

 

The servo driver is a controller in the servo system, responsible for converting control signals into control signals of the motor, and controlling parameters such as rotational speed, position, and torque of the motor. Servo drivers usually include modules such as signal acquisition, signal processing, and power amplification, which can achieve accurate control of the motor and ensure the stability and reliability of the system.

 

Delta B2 A2 AB A3 B3 Servo Motor Encoder Cable


Servo motors and servo drives are usually sold as a whole, and can also be customized and assembled according to user needs.


Traditionally, servo systems are called servo. Therefore, servo does not necessarily refer to only servo motors, but may refer to both. There are also individual inertial pointing servo motors.

 

The Servo Motor Encoder control cable harness with high quality and stable performance will make your servo machine perform better. In response to the development of industrial automation and the Internet of Things (IoT), Premier Cable now provides cable assemblies harnesses that can meet different servo motor, and supports bus control such as EtherCAT, CANopen, and Modbus. This allows your company's products to stand out in the fields of robotics, smart networked vehicles, medical, textile, 3C, industrial automation, smart factories, IoT, and AGV. Leave us message now for more.

 

 AGV Industrial Automation Robotic Servo Motor Encoder Cable

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.