News Center

How to connect the 5 Pin DeviceNet wires

www.premier-cable.net


How to connect the 5 Pin DeviceNet wires

 


DeviceNet is an industrial automation network used to connect industrial equipment such as sensors, actuators and more complex equipment. DeviceNet uses Controller Area Network (CAN) as its underlying protocol. Its physical layer is usually a five-wire system, including two data lines, one power line, and two public lines

 


The following is a common DeviceNet five-wire wiring method:

 

1. Data Lines: DeviceNet has two data lines, usually labeled CAN_H (CAN High) and CAN_L (CAN Low). These two lines are used to transmit data. DeviceNet uses differential signaling, which means that the voltage difference on the CAN_H and CAN_L lines is used to represent the data bits. Generally speaking, CAN_H is connected to the red wire and CAN_L is connected to the black wire.

 

2. Power Line: This is the power supply line, usually labeled V+. This line provides 24V DC power to the devices on DeviceNet. Generally speaking, V+ is connected to the white wire.

 

3. Common Lines: DeviceNet has two common lines, usually labeled V- and Shield. V- is the common reference line of the power supply, usually connected to the blue wire. Shield is a ground wire used to shield electromagnetic interference, usually connected to the green wire.

 

Tel : 0086-0139-2949-7934
 
Skype : james198585 

Email :  James@premier-cable.net
 
Email :  sales@premier-cable-mfg.com
 
Website : www.premier-cable.net

 

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.