News Center

What is a low loss cable?

www.premier-cable.net


DB9 to AISG RET Control Cable

 

 

Low-loss and ultra-low-loss cables are coaxial cables with better shielding than standard RG coaxial cables, helping to achieve low attenuation losses at high frequencies. For critical applications, these LL/ULL cables outperform standard coaxial cables.

 

 

Advantages of Low Loss and Ultra Low Loss Cables

 

Low attenuation loss is the main advantage when selecting low-loss or ultra-low-loss cables. This is critical for microwave, military, WLAN, wireless, cellular, and medical applications. Another benefit of low-loss and ultra-low-loss types of cables are different physical or mechanical types, such as flexible, formable, or semi-rigid. Each physics type allows it to perform as desired in many different environments and applications.

 

 

Low Loss and Ultra Low Loss Cable Applications

 

Due to the low attenuation loss, low loss and ultra low loss cables are usually selected for but not limited to the following applications:

 

Radar

 

Communication

 

Radio Frequency (RF)

 

Military

 

Aerospace

 

WLAN

 

Cellular and wireless

 

Test and Measurement Equipment

 

Premier Cable is a leading supplier of custom and stock Low Loss (LL) and Ultra Low Loss (ULL) cables. Low-loss and ultra-low-loss cables are often used when standard coaxial cables cannot provide low distance attenuation losses.

 

 

Ericsson RET Control Cable

 

ZTE RRU DB15 AISG RET Cable

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.