Products

ADA-SSC-GM Smart Serial to RJ45 Female Cable is for network devices, mainly used to connect Cisco WAN interface card (WIC-2T) with 26-pin smart serial interface to Ethernet devices or other network devices. Widely used to connect routers and modems, switches or other network devices for serial communication device connection. Support customization!

USB to Rollover Console Cable transmission is RS232 serial communication signal, with USB to serial port conversion chip FTDI FT232R. Support plug and play, no external power supply required. Usually used to connect computers and network devices, routers and switches to configure and manage the devices through the terminal command line interface. Support customization!

USB to RJ45 Console Crossover Cable supports RS232 serial communication standard and is a common tool for network administrators to configure and maintain routers, switches, firewalls and other devices. This cable can directly access network devices using the USB interface through the USB to RJ45 console cable, avoiding the trouble of using a serial port converter. Compatible with Cisco USB Console Cable. Customization is supported!

USB to RJ45 RS232 Console Cables are commonly used to connect computers or other devices to the console port of network devices such as Cisco, Huawei, TP-Link routers and switches. These cables are often used for configuration, management, and troubleshooting of network devices, especially when the device cannot be directly accessed over the network. This cable is compatible with Cisco's USB Console Cable. Customization support!

CAB-SS-V35FC 26 Pin to V.35 Female Cable is designed for Cisco WIC-2T, WIC-2A/S WAN interface cards. 26-pin Smart Serial interface is usually used as a serial port for WAN connection on Cisco routers. V.35 interface supports synchronous serial communication data transmission up to 2 Mbps. This cable is compatible with Cisco Smart Serial CAB-SS-V35FC and supports customization.

CAB-SS-V35MT Smart Serial 26 Pin to V.35 Male Cable is a cable dedicated to serial communication. The V.35 interface is usually a 37-pin connector, a standardized interface with a rectangular shape, commonly used for data transmission, especially in high-bandwidth environments. This cable is usually used for connections between data communications and network devices, such as routers, switches, and serial devices. Customization is supported!

CAB-SS-6026X Smart Serial Cable is a serial crossover cable specially designed for Cisco network devices. It is mainly used for DTE to DCE connection between devices. This cable is particularly suitable for configuration, testing and data transmission of network devices. It is one of the commonly used serial cables in Cisco devices. Customization is supported!

CAB-SS-449FC Smart Serial Cable is mainly used to connect the Smart Serial port of Cisco router to devices using DB-37 interface, usually used for RS-449 serial communication, suitable for applications requiring high bandwidth and stable signal. Customizable!

The CAB-SS-449MT Smart Serial Cable provides fast, stable point-to-point data transmission via a serial connection interface that supports the RS-449 standard. Connects a Cisco router with a 26-pin male connector to a DTE data terminal device with an EIA/TIA 449 DB37 connector. The cable length can be customized!

CAB-SS-530MT is a Smart Serial Cable from Cisco, used to connect routers with other serial devices. It supports high-speed data transmission and is specially designed to connect devices that support the RS-530 standard. This cable uses a smart serial interface that can dynamically negotiate the communication parameters of serial devices to improve compatibility and connection stability. Customizable cable length!

CAB-SS-232FC 26-Pin to DB25 Female Cable is a 26-pin Smart Serial connector to DB25 pin Female interface serial cable. It is mainly used to connect Cisco routers or network devices to external serial devices, such as modems or terminal servers, and is usually used for serial communication based on the EIA-232 (also known as RS-232) standard. The cable length can be customized!

CAB-SS-232MT Smart Serial Router Cable has 26 26-pin male connector to the DTE device with a DB25 male connector. The interface standard is EIA/TIA 232. Applicable to Cisco WIC-2T, WIC-2A/S WAN interface cards. This cable is compatible with the Cisco CAB-SS-232MT Smart Serial Cable and supports customization!