Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
Products
Product Center
XT60 Male to 2 Pin Screw Terminal Block Power Cable
Number:
PCM-HD-0276
Category:
XT60
Detail
| Product Name | XT60 Male to 2 Pin Screw Terminal Block Power Cable |
| Part No. | PCM-HD-0276 |
| Connector A | XT60 Male |
| Connector B | 2Pin Terminal Block, 5.0mm Pitch, Wire Range 26-14AWG |
| Wire Guage | 18AWG, PVC Jacket |
| Cable Length | 0.6m or customized |
| Customization | Yes, please contact us for a quote and samples. |
About this Item
Premier Cable — Your Expert in Custom XT30, XT60 & XT90 Power Cable Solutions!
Premier Cable XT60 Male to 2 Pin Terminal Block Power Cable is designed for reliable DC power connection between XT60 battery connectors and screw terminal interfaces.
Featuring an XT60 male connector on one end and a 2-pin 5.0mm pitch terminal block on the other, this cable provides a convenient solution for power distribution, battery connection, and equipment integration where secure wiring termination is required.
Applications
- Battery Power Connection Systems
- Portable Power Stations
- RC Battery and Charging Equipment
- Solar Energy Storage Systems
- DC Power Distribution Equipment
- Industrial Control Devices
- Electronic Test Equipment
- DIY Power Projects
Frequently Asked Questions (FAQ)
Q1: What is an XT60 Male to Terminal Block Cable used for?
A1: This adapter cable is designed to bridge devices with an XT60 female port (such as LiPo battery packs, solar generators, RC chargers, or 3D printer power supplies) to open wire connections. The screw terminal block allows for easy, solderless wiring to raw copper leads, power supplies, load testers, or custom DIY electronics.
Q2: Do I need soldering to connect wires to the terminal block?
A2: No, no soldering is required. The terminal block features a heavy-duty screw/clamp mechanism. Simply strip approximately 6–8 mm of insulation from your bare wire, insert it into the positive (+) or negative (-) slot, and tighten the screw securely with a small screwdriver.
Q3: How do I ensure correct polarity when wiring to the terminal block?
A3: Correct polarity is critical to prevent short circuits or equipment damage:
- XT60 Connector Side: The XT60 housing has structural indicators—the FLAT side corresponds to Positive (+), and the POINTED/CHAMFERED side corresponds to Negative (-).
- Terminal Block Side: Most blocks feature stamped + and - symbols on the housing, or clear color-coded wire leads (Red for Positive, Black for Negative). Always verify with a multimeter before powering on your setup.
Q4: Can I request custom wire lengths, AWG sizes, or terminal block types for bulk orders?
A4: Yes, as an OEM/ODM manufacturer, we offer full customization for wholesale and B2B orders. You can customize:
- Wire Gauge & Type: 10AWG, 12AWG, 14AWG, 16AWG (High-temperature flexible silicone or PVC insulation).
- Cable Length: Standard 15cm, 30cm, 50cm, 1m, or tailor-made lengths.
- Terminal Types: 2-pin screw terminals, spring-cage push-in terminals, or custom terminal block pitch (e.g., 5.0mm / 5.08mm).
Leave a Message
Make you smile , is our mission. We are glad to reply all your questions about cables processing or our products. Please fill in the table below. Thank you