Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
Products
Product Center
M8 4 Pin Plug to Open End CAN Bus RS485 Cable
Part Number:
PCM-M8-4
Category:
M8 Adapter Cable
Products Description
| Product Name | M8 4 Pin Plug to Open End CAN Bus RS485 Cable |
| Part No. | PCM-xxx |
| Connector A | M8 A-Code, 4 Pin, Male |
| Connector B | Open End, Ferrule Terminal |
| Contact | Copper, Gold-plated |
| Cable Length | 1m,or customized |
| Customization | Yes, please contact us for a quote and samples. |
About this Item
Premier Cable — Your Expert in Custom XT30, XT60 & XT90 Power Cable Solutions!
The Premier Cable M8 4 Pin Male to Open End CAN Bus RS485 Cable is designed for industrial communication and control applications involving servo motors, stepper motors, and servo drives.
It features an M8 A-Code 4-pin male connector on one end and open wires with ferrule terminals on the other, enabling convenient connection to controllers, drive terminals, and industrial control equipment.
This cable provides a practical wiring solution for CAN bus and RS485 differential communication interfaces. Pin assignments and wire configurations can be specified according to the connected equipment.
Typical Wiring Applications
CAN Bus Connection wiring :
CAN_L → CAN_L
CAN_H → CAN_H
Power / GND → According to equipment requirements
Used for multi-node communication between intelligent motors and controllers.
RS485 Connection wiring :
RS485- → RS485 -
RS485 + → RS485 +
Provides stable differential signal communication for industrial devices.
Note: Actual wire colors and pin assignments depend on the cable configuration and equipment specifications. Confirm the device pinout before wiring. CAN bus and RS485 are different communication protocols; verify the required interface before selecting the wiring configuration.
Applications
- Servo Motor Communication
- Stepper Motor Control Systems
- Servo Drive and Motor Controller Connections
- CAN Bus Industrial Networks
- RS485 Communication Interfaces
- PLC and Motion Controller Connections
- Industrial Automation Equipment
- Intelligent Motor Networking
- CNC Machines and Motion Control Systems
- Factory Automation and Control Panels
Frequently Asked Questions (FAQ)
Q1: What is the main application of the M8 4-Pin male to open-end CAN Bus / RS485 cable?
A1: The Premier Cable M8 4-Pin male to open-end cable is specially designed for multi-node industrial communication between smart controllers, servo motors, and stepper servo drives using CAN Bus or RS485 differential signal protocols.
Q2: How do you wire the M8 4-Pin open-end cable for CAN Bus and RS485 connections?
A2: For CAN Bus wiring, connect CAN_H and CAN_L directly to the corresponding lines with power and ground attached as required by the equipment, whereas for RS485 wiring, map RS485+ and RS485- respectively to maintain stable differential communication.
Q3: What specifications and custom length options does Premier Cable provide for this M8 cable?
A3: Features an M8 A-Code 4-pin male connector on one end and stripped open-end ferrule terminals on the other, Premier Cable supplies a standard 1-meter length along with fully customizable cable length options to fit specific industrial cabinet and drive setups.
Leave a Message
Make you smile , is our mission. We are glad to reply all your questions about cables processing or our products. Please fill in the table below. Thank you