Products

+
  • DSC_4488.jpg
  • DSC_4481(1).jpg
  • DSC_4495.jpg
  • DSC_4498.jpg

Premier Cable NMEA 2000 Inline Terminator

The inline terminator is used where the network is terminated at a product, for example a GPS or weather station at the top of a mast.

Category:

NMEA 2000 Cable


Detail

Premier Cable NMEA 2000 Inline Terminator

 

Premier Cable Micro-C Inline Terminator  

 

Premier Cable Micro Inline Terminator

 


Two termination resistors are required on every NMEA 2000 network, one on each end of the trunk line. Normally, a male termination is used since male pins tend to point back to the power source. In cases where the gender is reversed, a female terminator may be required.

 


The inline terminator is used where the network is terminated at a product, for example a GPS or weather station at the top of a mast. 

 


• Screw terminal connector for positive connections

• Termination resistors are used to terminate both ends of the trunk line

 


NMEA 2000 is a low-cost data network operating at 250 Kbps and utilizing the Controller Area Network Integrated Circuit  

 


It allows multiple electronic devices to be connected together on a common channel for the purpose of easily sharing information

 


The inline terminator connects between a backbone cable and a drop cable, while still maintaining proper termination for the end of the network

 


Use our inline terminator between the backbone cable and your compatible device to correctly terminate the network.

 

These terminators are great for saving money and space, by replacing a T and resistor with one part. 

 

Leave a Message

Make you smile , is our mission. We are glad to reply all your questions about cables processing or our products. Please fill in the table below. Thank you

Submit