Products

HONDA NMEA2000 Cable with T-Piece

Honda NMEA2000 Outboards CABLE 5M with T CONNECTOR

Category:

NMEA 2000 Cable


Detail

Honda NMEA2000 Connecting cable

 

HONDA NMEA2000 Cable with T-Piece

 

NMEA 2000 Honda Engine Interface Cable  

 

NMEA2000 connector for Honda outboard Engine

 

Honda NMEA2000 Outboards CABLE 5M with T CONNECTOR

 


Yamaha Connector to Male Micro NMEA 2000  

 

Yamaha Hub to NMEA 2000 Cabling Extender

 

NMEA 2000 Network Engine Interface Cable 

 

Lowrance Engine to NMEA 2000 Network Interface Cable  

 


NMEA2000 to FW-C-6F-B Connector for Honda outboard Engine compatibe with standard NMEA2000, plug and play with Lowrance, Raymarine, Simrad, Navico, Humminbird, Furuno, LXNAV, Garmin... Compatible from Honda BF40 and newer.


For connection from a compatible Honda Outboard to NMEA2000 device. This is a 6m cable with a Male Connector. The NMEA2000 Network Standard specifies the Mini and Micro cabling and connector specification for standard networks.

 

Some marine manufacturers have based their networks on non-standard connectors and we have a range of adaptors that can connect these networks to the standard cabling. If the adaptor you need is not here please contact us as we may be able to produce it for you.


 

The following data can be displayed through the connection cable:

 

Engine speed

Trim position

Operating hours

Fuel consumption

Engine temperature

Neutral position of the gearbox

Charging voltage of the generator

Alarm function for oil pressure, overheating, engine control, charge control

 

Honda NMEA2000 Connecting cable

HONDA NMEA2000 Cable with T-Piece

 

NMEA2000 connector for Honda outboard Engine

 

Honda NMEA2000 Outboards CABLE 5M with T CONNECTOR

Leave a Message

Make you smile , is our mission. We are glad to reply all your questions about cables processing or our products. Please fill in the table below. Thank you

Submit