CAN and CAN FD Connection Cable
CAN Bus cable harness
CAN Bus Cable
We provide pre-terminated CAN bus cables for our drives that support the CANopen communications protocol
9 pin D-Sub sockets in accordance with CiA® 303-1 at both ends
Shield connected to GND ， without termination resistors
Suitable for the use in CAN FD buses
This CAN Cable is 2 meters in length with DB9 female connectors on each end.
The cable consists of stranded 24 AWG copper twisted-pair conductors for the CAN signals; electronic grade flexible polyethylene insulation, tinned copper shield and a flame retardant violet PVC jacket.
A terminator should be used at the end of each bus system, the terminator provide line balancing for best CAN signals.
This cable does not provide terminations, please use the terminated cable or the separate terminator.
For use with all versions of these Peak PCAN adapters :
Signal: Pin - Pin
CAN_L 2 - 2
CAN_GND 3 - 3
CAN_H 7 - 7