LIN Bus Monitoring Module Cable

LIN Connection Cable connector

LIN bus adapter Cable

Pre-Made Cable Set for LIN Module

RS232 DB9 to Banana connector Cable

 
Serial DB9 plug 9 pin to Banana connector 

LIN bus is a low-cost serial communication network defined for automotive distributed electronic systems. It is a supplement to other automotive multi-channel networks such as controller area network (CAN) Or applications that do not have high demands on fault tolerance.

LIN bus is based on SCI (UART) data format and adopts the mode of single master controller/multiple slave devices, which is a special case of UART.

The Local Interconnect Network is a low-cost serial communication network for controlling distributed electronic systems in automobiles.

The goal of LIN is to provide auxiliary functions for existing automotive networks such as the CAN bus, so the LIN bus is an auxiliary bus network.

In applications where the bandwidth and versatility of the CAN bus is not required, such as communication between smart sensors and braking devices, the use of the LIN bus can significantly save costs.

In addition to defining the basic protocol and physical layer, the LIN technical specification also defines development tools and application software interfaces.

The LIN communication is based on the SCI UART data format and adopts the mode of single master controller/multiple slave devices.

Use only a 12V signal bus and a node sync clock line with no fixed time base.

This low-cost serial communication mode and corresponding development environment have been standardized by the LIN Association.

Standardization of LIN will reduce costs for automakers and suppliers in developing application operating systems.