CAN to Ethernet Converter cable DB9 to RJ45

CAN bus to Ethernet converter cable DB9 to RJ45

CAN Bus To Ethernet Gateway cable DB9 to RJ45

DB9 to RJ45 CAN Adapter 

RJ45 serial adapter CANopen 

 
CAN Adapter Cable RJ45 to DB9  

USB to CAN Sub-D9 RJ45 Adaptor

Cable Length  ： 20 cm

Connector : RJ45 plug to Sub D9 plug

CAN to Ethernet Converter

CAN bus to Ethernet converter

CAN Bus To Ethernet Gateway

Does the CAN bus CANopen data converter have an RJ45 interface ?

Basically, it is impossible to carry, because the communication interface of CAN bus is generally terminal interface, and the equipment of RJ45 interface is generally related to Ethernet.

That is, if the devices are Ethernet to CAN or Ethernet to CANopen converters, they must have RJ45 ports.

Some serial buses, such as 232, sometimes use the RJ45 interface for connection, but it is also relatively rare, generally only used in PLC.

Ethernet to CAN is used for the interconnection between Ethernet communication and CAN communication to realize data interaction between two different protocol communications. Now there are converters that implement this function on the market.

Ethernet to CANopen is to convert Ethernet data and CANopen data to each other. In this case, we can connect the PC to the CANopen bus to become a node to control other devices or monitor their status.

How to convert Ethernet to CAN gateway ?

 
CAN conversion Ethernet gateway is a protocol gateway that can convert CAN bus data into Ethernet data for relaying, which is a data converter.

Just like a Chinese and an American cannot communicate directly through language, it is impossible for CAN bus data to communicate with serial port data.

If the language is not available, we have to find a translator. If the bus information is not available, we have to change one of them into another and then communicate. CAN gateways do this.

Of course, the most common application of CAN to Ethernet gateway in real life is to act as a repeater to help extend the effective communication distance.

When we use the CAN to Ethernet gateway, the CAN end of the device is connected to the CAN device, and the Ethernet gateway of the device is connected to the router or the computer under the same IP through the network cable.