Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
Products
Product Center
DB9 Female Terminal CAN Bus Adapter with 120 Ohm Resistor
Category:
CAN Bus Cable Adapter
Detail
CIA standard CAN bus DB9 adapter with 120 ohm terminal resistance
DB9 to 4-Pin Terminal Block Adapter 120 Ohm termination resistor
DB9 Female Terminal CAN Bus Adapter with 120 Ohm Resistor
CAN bus to D-Sub connector three-pin screw terminal block
CAN bus D-Sub 9 pin connector to terminal block
DB9 to OPEN 4 Can Bus adapter
German CIA standard DB9 CAN interface, the pin is 2 3 5 7
2-pin CAN-L
7-pin CAN-H
The adapter comes with a 120 ohm resistor, which can be controlled and enabled by the DIP switch
Pin Map
2 CAN L
3 GND
5 SHLD
7 CANH
Converts a DB9 female connector into a 3-pin terminal block
120 Ohm termination resistor between pin 2 and pin 7 , CAN H and CAN L
Terminal block provides complete 3 signals directly corresponding to the 3 pins of the DB9 female connector
The CAN Terminator can be used where the CAN cable or CAN node at the end does not have internal termination.
