News Center

Introducing a new interposer for FTDI USB


FTDI's new USB-to-serial chip: FT232RL. Earlier models of FT232: FT232BM, the new chip of FTDI USB FT232BL can easily convert USB signals into RS-232, RS422, RS485 signals/RS-232, RS422, RS485 signals into USB signals. FTDI USB interface conversion chip FT232R realizes the conversion from USB to serial UART interface, and can also be converted to synchronous and asynchronous BIT-BANG interface mode. Provide FTDI USB drivers under various operating systems, it will be easier to design and use this chip.

FTDI USB components

1: FTDI USB chip integrates EEPROM, which can be used for IO configuration and storage of USB VID, PID, serial number and product description information.

2: The FTDI USB chip integrates a level converter, so that its I/O port level supports a wide range of 5V-2.8V.

3: The I/O pins of FTDI USB have strong driving ability and can drive multiple devices or long data lines.

4: The power-on reset circuit is integrated in the FTDI USB chip.

5: The FTDI USB chip can generate the clock by itself, without the need for an external crystal oscillator.

6: FTDI USB integrates a power supply decoupling RC circuit.

7: FTDI USB This chip complies with ROHS standard.

8: FTDI USB This chip supports QFN32PIN package: FT232RQ and SSOP28PIN package: FT232RL.

Through the above introduction and analysis of FTDI USB, hope it helps you.

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.