News Center

The difference between USB2.0 and 3.0 in RS232 to Mini USB Cable


The difference between USB2.0 and 3.0 in RS232 to Mini USB Cable:

The USB3.0 standard of RS232 to Mini USB Cable provides ten times the transmission speed of USB 2.0 and higher energy-saving efficiency, which can be widely used in PC peripherals and consumer electronics. The theoretical bandwidth of the USB3.0 interface of RS232 to Mini USB Cable is increased to 5Gbps, while the theoretical bandwidth of USB2.0 is 480Mbps. All high-speed USB2.0 devices that get USB3.0, such as RS232 to Mini USB Cable, will have better performance.

RS232 to Mini USB Cable on sales

Main difference:
1. The data bandwidth of USB3.0 of RS232 to Mini USB Cable is ten times that of USB2.0, which can reach 5Gb/s (480MB/s). The USB3.0de synchronous transmission bandwidth of RS232 to Mini USB Cable can also reach 384MB/s, which is one of the main differences between USB3.0 and 2.0;

2. The USB3.0 of RS232 to Mini USB Cable has lower power consumption in comparison (about 25% lower power consumption than USB2.0 when the data transfer amount is 20MB/s);

3. In RS232 to Mini USB Cable, USB3.0 is more energy-saving than 2.0. For devices that are temporarily waiting, the power-saving mode can be used;

4. In RS232 to Mini USB Cable, USB3.0 can provide more power through the cable (2.5W to 4.5W);

5. In RS232 to Mini USB Cable, USB3.0 is backward compatible. The USB3.0 of RS232 to Mini USB Cable supports USB2.0 devices, but USB2.0 cannot support USB3.0.


Through the above introduction and analysis of the difference between USB2.0 and 3.0 in RS232 to Mini USB Cable, hope it helps you.

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.