Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
News Center
What are the stages of producing a Molex Connector
Publish:
2022-02-11 17:33
Source:
Molex Connector is a connector that is very trusted by everyone, so do you know what stages it has in its manufacture? Let me explain it to you.

1. Stamping
The manufacturing process for Molex Connectors typically begins with stamped pins. Electronic connectors (pins) are stamped from thin metal strips using large high-speed presses. One end of the large-volume metal strip is fed into the front end of the punching machine, and the other end is wound onto the take-up reel through the hydraulic table of the punching machine, and the metal strip is pulled out of the take-up reel and pushed out to punch out the finished product.
2. Electroplating
After the Molex Connector pins are stamped, they should be sent to the plating section. At this stage, the electrical contact surfaces of the connector will be plated with various metal coatings. A class of problems similar to the stamping stage, such as pin twisting, chipping or deformation, also occurs during the feeding of punched pins into electroplating equipment.
3. Injection molding
Molex Connector manufacturers tell you that the plastic housing of the electronic connector is made at the injection molding stage. The usual method is to inject molten plastic into a thin metal film, which is then rapidly cooled. When molten plastic does not completely fill the film, so-called "leakage" occurs. This is a typical defect that needs to be detected during the injection molding stage.
4. Assembly
Molex Connector manufacturers tell you that the final stage of electronic connector manufacturing is the assembly of the finished product. There are two ways to insert plated pins into the cartridge holder: separate pairs or combined pairs. Individual inserts mean that each pin is plugged in; each time an insert is inserted, the pins are inserted into the box at the same time. Regardless of the plug-in type, manufacturers require all pins to be tested for missing and properly positioned during the assembly stage; another type of routine inspection task involves the measurement of spacing on the mating surfaces of the connector.
The above are the 4 stages that the production of Molex Connector needs to go through. I hope it will be helpful to everyone.
Related News
10M Quad MATE-AX & HFM Mini FAKRA 4-in-1 Cable Assemblies Now Available – Stock Ready, No MOQ
The 10M Quad MATE-AX & HFM Mini FAKRA 4-in-1 Cable Assemblies is ideal for connecting cameras, sensors, radar modules, area controllers, and domain control units in modern vehicles, buses, coaches, passenger buses, trucks, and commercial transportation systems.
7/8" Power Cable Solution for AGV and AMR Robotics Applications
Premier Cable’s DeviceNet 7/8" power cables for AGV and AMR robots, deliver the stability, durability, and flexibility required for next-generation robotic systems. Start Your Custom Cable Project Today! Get reliable power solutions for your AGV or AMR system!
GMSL Camera Cables Solution for Automotive In-Vehicle Developer System and Robotic
Looking for reliable and customizable GMSL camera cables? Premier Cable provide GMSL, GMSL2, and GMSL3 camera cable with Fakra and Quad Fakra, customizable for NVIDIA DRIVE AGX Thor Developer Kit, automotive, unmanned vehicles, robotics, AMR, and smart cities.
Premier Cable MATE-AX & H-MTD GMSL Ethernet Cable for NVIDIA DRIVE AGX Thor Developer Kit
Premier Cable provide custom MATE-AX & H-MTD breakout cables for NVIDIA DRIVE AGX Thor, supporting humanoid robots, machine vision, Industrial Vehicles, Robotics, and Autonomous Machines.
How H-MTD Cable Empower Robotaxi and Autonomous Driving Systems
H-MTD cable assemblies enable high-speed automotive Ethernet for Robotaxi, supporting cameras, LiDAR, and ADAS with customizable solutions.
Premier Cable Launches TE 282762-1 2 Way Automotive Cable Assembly
Premier Cable introduces the TE 282762-1 AMP Junior Power Timer automotive wiring harness, customizable, and widely used in sensors, fuel injection, ignition systems, and turn signals.