News Center

Remote Electrical Tilt RET Actuator

www.premier-cable.net


RRH Remote Radio Head is a new technology equipment used in mobile broadband network base stations. The main benefit is to improve the transmission efficiency of existing signals and to expand its network coverage under an easier network architecture.

 


The new generation of RRH products can concentrate the Radio Server in the base station in one base station and connect it with the equipment room through optical fiber. Because the introduction of optical fiber connection can extend the transmission distance very far, telecom operators do not need to build one for each base station. As long as the computer room is within an area of ​​40 kilometers, many RRH device bases can be set up through optical fibers to enhance the overall network signal performance.

 


That is to say, by separating a part of the previous base station module, and by separating the radio baseband control (RadiosServer, RS) from the RRH, the tedious maintenance work can be simplified to the RS side, and one RS can be connected to several RRHs, and optical fibers are used in between. The connection saves space, reduces setup costs, and improves networking efficiency.

 

To most people, the term RRH may be unfamiliar. The characteristic of RRH technology is that the base station can be divided into two parts: wireless baseband control (RadioServer) and remote radio frequency. The wireless device part can be individually set remotely, thereby reducing the operator's capital expenditure (CAPEX) and operating cost (OPEX) while flexibly building the network

 


Using RRH technology, various networks of star, tree, chain, ring and other structures can be constructed flexibly and effectively according to different environments. E.g,

 

The reason why RRH technology is adopted by many equipment manufacturers is that 3G network has advantages that other networks do not have. A part of the previous base station module is separated, and the tedious maintenance work can be simplified to the RS side by separating the RS (radio baseband control part) from the RRH.

 

One RS can be connected to several RRHs, which not only saves space, but also reduces setup costs and improves networking efficiency. Moreover, the interface connecting the two uses optical fiber, which has less loss and can greatly reduce power consumption.

 

In addition, for the interface, the methods adopted by equipment manufacturers are different. It is worth mentioning that the RRH of NEC is based on the open CPRI interface.

 

Antenna Linear actuator 

 

Remote Electrical Tilt RET Actuator 
 


Remote Electrical Tilt Devices RET 

 

Remote Electrical Downtilt System 


DB15 AISG Cable for RRU RET 

 

RET control cable DB15 AISG connector

 

AISG DB15 CONTROL CABLE FOR RET SYSTEM

 

RET actuator RRH Remote Radio Heads DB15 connector


Remote Electrical Tilt Unit for antenna with electrical down-tilt

 

Compliant to AISG 2.0 / 3GPP

 

Compact size( Light, Thin, Short, Small )

 

Suitable for operation under outdoor conditions

 

RET actuator RRH Remote Radio Heads DB15 connectorAISG DB15 CONTROL CABLE FOR RET SYSTEMRET control cable DB15 AISG connectorDB15 AISG Cable for RRU RET Remote Electrical Tilt RET Actuator Antenna Linear actuator

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.