News Center

USB to Serial Hub

www.premier-cable.net


USB to Serial Hub


 
The USB-to-serial hub provides one USB serial port upward for connection and communication with the computer, and four RS-232 serial ports downward for data communication with the lower serial port devices

 

The computer expands four RS-232 serial ports through the USB serial port, and virtualizes the corresponding virtual serial port in the computer through the driver software distributed with the USB-to-serial port hub. The host computer software only needs to communicate with the corresponding virtual serial port to realize the original data communication based on RS-232 serial port

 

USB to serial hub transmission rate 300-115200BPS


Features : 

The RS-232 serial port conforms to the EIARS-232 specification, and the maximum rate supports 115.2Kbps. The USB serial port conforms to the USB1.1/2.0 specification, and the maximum rate supports 12Mbps.

Support hot swap, plug and play function, no need to set DMA, IRQ, I/O, easy to use. Power is supplied by stealing power through the USB bus, or through an external power supply to ensure the stability and reliability of the device.

Using the British FTDI chip solution, the performance is stable and reliable.

Support Windows 95/2000/XP operating system, support Linux, MAC operating system.

Working mode: virtual serial port working mode, full-duplex communication

Transmission distance: within 15 meters for USB port, within 5 meters for RS232 serial port

Use environment: -20 degrees to 60 degrees, humidity 5%-95%

Interface features: USB conforms to USB1.1 and USB2.0 specifications, serial port conforms to EIA-RS232 protocol

Typical applications: campus monitoring system, intelligent community, intelligent building system, intelligent traffic control system, industrial control automation, factory data acquisition.


USB to Serial Hub

USB to RS-232 serial Hub

USB RS-232 serial port Hub

 


 

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.