News Center

What type of antenna is used for 5G?

5G Antennas - Since many applications developed using 5G technology are based on different frequency ranges considered for 5G mobile communications. Therefore, it requires different 5G antennas to support different frequency bands. 5G will use Advanced Antenna System (AAS) – a hybrid of an AAS radio and a set of AAS features. AAS includes multiple antenna technologies, namely beamforming and MIMO (Multiple Input Multiple Output). All frequency bands in 5G require antenna systems to support them as the network develops.



In the points given below, it is mentioned why more cells are needed for 5g mm wave.



5G macro base stations – 5G networks are built with macro base stations and small cells with edge computing capabilities. These cells operate by applying a system called MIMO, as mentioned earlier, and are able to serve wide areas. Send and receive more data simultaneously using MIMO antennas with multiple elements or points/connections. It will help users connect to the network while maintaining high throughput. Operators can proactively monitor handset performance through their mobile network latency, cell tower signal, speed, call setup success rate, and other QoE KPIs for cell tower network locations for important VIP or high ARPU customers that will serve 5G.



5G Small Cells – Small cells are seen as the foundation of next-generation wireless networks because they increase network coverage, capacity and density, especially when it exists indoors. It provides more bandwidth for 5G networks without requiring large investments in costly macro sites.



5Gmmwave - 5Gmmwave is a short-range, high-frequency wave that has the potential to provide high bandwidth in 5G networks. UK regulator OFCOM has designated "3.25 GHZ" spectrum in the 26 GHz band (24.25 GHz – 27.5 GHz) as a herald band for a new era of wireless networks, known as 5G in Europe.



Antennas have a pivotal role in enhancing the 5G network with more mobility in new-age sophisticated applications as it continues to improve 5G coverage and optimize bandwidth capacity with a key focus on RF signals on the areas they are required the most.Premier Cable specialized in AISG cable for over18 years, any cable needs, feel free to contact our sales via

Ericsson Signal CableFTCR Nokia 471408A OD Kabel RJ45 CAT5ENokia NSN Power Cable 995281B


Related News

What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.

CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.

Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.

Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."

What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.

The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.