News Center

What is RET cable?

www.premier-cable.net


RET cables provide a direct connection option from the main control unit (MCU) to the RET module. These cables come in a variety of lengths, with shorter lengths useful for "daisy-chaining" multiple RET modules on top of a tower or building. By connecting the modules together, you can reduce the amount of cables required from the MCU to the antenna. Many wireless infrastructure sites have installed Remote Electrical Tilt (RET) systems to optimize signal patterns.

 

 

RET control cable with male DB15 and female AISG connector

 

 

RET stands for Remote Electrical Tilt and is a system that can remotely adjust the electrical tilt of an antenna. The system is primarily used for mobile radio antennas, e.g. to optimize the alignment of mobile radio networks in the event of hotspots.

 

 

Premier Cable customizes RET control cables to your desired specifications. These cables are designed for RF telecommunications infrastructure with RET (Remote Electronic Tilt) component based systems, feeding data and power from the controller to the RET system components. Our cables are fully AISG EIA-485 Tier 1 system compliant. We also sell bulk cable by the foot as well as individual connectors.

 

AISG RET Control Cable Y Splitter ATCB-B01-Y-C30AISG RET CONTROL CABLERET AISG Control Cable Assembly

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.