News Center

NMEA 2000 T-type tap Micro or Mini T-type adapter

www.premier-cable.net


NMEA 2000 CAN Bus network 3-Port T-Connector

 

 

 

NMEA 2000 T-type tap Micro or Mini T-type adapter (tap) is mainly used for adding and connecting electronic equipment in the NMEA 2000 communication network. It is suitable for two-way connection of communication and control between main lines and branch lines. , is one of the most critical connectors in the field communication and control network of ships or yachts.

 

 

NMEA 2000 Terminating Resistor NMEA 2000 M12 or 7/8 inch connector terminating resistor, usually a 120 ohm resistor is integrally molded inside the connector and installed or applied to the end of the NMEA 2000 keel main wire. Used to absorb reflected waves on the network, effectively enhancing signal strength. Because the signal suddenly encounters little or even no cable impedance at the end of the transmission line, that is, the impedance is discontinuous, the signal will cause reflection at this place.

 

 

NMEA 2000 (board-end) panel-type board-end connectors are divided into single-head panel type and double-head wall-through type. They are usually soldered or PCB Pin-type connecting conductors. They are mainly installed and used in NMEA 2000 master-slave. On the casing of the equipment (and removable equipment), it is plugged into the corresponding wire end connector and used as a communication input and output port on the electronic equipment side.

 

 

Premier Cable designs and manufactures cable assembly connectors, open standard cables, cable assemblies, connectors, terminals and power products that support the NMEA 2000 system.

 

 

NMEA2000 cable

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.