News Center

Classification of NMEA 2000 connectors

www.premier-cable.net


1. Device connector

 

NMEA 2000 device connectors are connectors used to connect devices to the bus. This type of connector usually only has one plug connector and two converters.

 

 

2. System connector

 

NMEA 2000 system connector is a connector used to connect different NMEA 2000 bus systems. This is a more complex connection type that can be connected to all connectors.

 

Field installable connector

 

 

3. Power connector

 

The NMEA 2000 power connector is used to provide power from the bus. This connector is designed to be compatible with other connectors.

 

 

N2K 4 Way ConnectorNMEA 2000 Marine T-Connector

Related News


What is a terminal block used for?

While there are many factors to consider when designing an overall system, terminal blocks are an optimal solution for complex electrical system connections. With a variety of color options and configurations, Premier Cable’ terminal blocks offer a range of options to meet your design challenges.


CANBus Applications

CAN-bus has been widely used in various automation control systems. For example, CAN-bus has incomparable advantages in various fields such as automotive electronics, automatic control, smart buildings, power systems, and security monitoring.


Introduction to M12 connector pin coding

M12 encoding types are A encoding, B encoding, D encoding and X encoding. A-code, B-code and X-code are some of the earliest developed and longest-available M12 connectors. The latest M12 coding types currently under development are K coding for AC and L coding for PROFINET DC.


Cables – What are the correct cable sizes for an NMEA 2000 network?

The three different sizes of NMEA 2000 certified DeviceNet standard cabling are "micro," "mid," and "mini."


What are the advantages of NMEA 2000?

The Premier Cable Starter Kits provide everything you need to get to create a basic NMEA 2000 network from scratch.


The role of DeviceNet terminal resistor

DeviceNet_network is a fieldbus network protocol based on Controller Area Network (CAN). In the DeviceNet network, the terminal resistor plays the role of compensation and protection for signal transmission. The function of the terminal resistor is to eliminate signal reflection and interference and ensure the signal transmission quality.