Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
Products
TTD USB-RS485-WE-1800 USB to RS485 Serial Cable FTDI Chip
Category:
TTDFTDI Cables
Product Description
| Product Name | USB-RS485-WE-1800 USB to RS485 Serial Cable |
| DWG No. | USB-RS485-WE-1800 |
| Connector A | RS485 USB A |
| Connector B | 6 Wire End |
| Chipset | FTDI FT232R |
| Pin Wire | GND/Black, B-/Yellow, VCC/RED, Pin1 120Ohm/Brown, A+/Orange, Pin 2 120Ohm/Green |
| Cable Length | 1.8m/6FT, Customizable |
What is the difference between RS232 USB and RS485 USB?
The main differences between RS-232 and RS-485 are:
Communication mode: RS-232 is usually point-to-point communication, suitable for short-distance transmission (generally no more than 15 meters), while RS-485 supports multi-point communication, can connect multiple devices, and is suitable for long-distance transmission (up to 1200 meters).
Signal transmission: RS-232 uses single-ended signals and is easily affected by noise, while RS-485 uses differential signals, which has strong anti-interference ability and is suitable for harsh environments.
Number of connections: RS-232 can generally only connect one device, while RS-485 can connect up to 32 devices on the same bus.
Application scenarios: RS-232 is mostly used to connect computers to external devices, such as modems; RS-485 is widely used in industrial automation and remote monitoring systems.
