Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
Products
PRODUCTS CENTER
Modbus RS485 RJ45 terminal resistor is used to eliminate signal reflection and ensure the stability and reliability of data transmission. It is usually installed at both ends of the bus to prevent signal interference. It is used for industrial control systems, Building Automation, Solar Inverter, Intelligent transportation system, factory automation, etc.
120 Ohm RJ45 Terminal Resistor is mainly used in differential signal communication systems that require impedance matching to reduce signal reflections, especially in long-distance communications, industrial environments or dedicated networks. These terminal resistors help improve signal stability and transmission quality.
4P4C CAN Bus Terminal Resistor is usually at the end of the signal transmission. When the transmission distance is long, the anti-interference will decrease, and a 120Ω terminal resistor needs to be connected at both ends of the bus to ensure the stability and accuracy of the signal. RS485 CAN Bus Terminal Resistor, 120 Ohm 4P4C Termination Resistor, RJ12 RJ11 RJ10 RJ9 4P4C 6P6C Terminator
DC Power Supply Panel Mount Cable is used to connect DC power to the panel interface of the equipment. It is convenient and fast, suitable for various applications that require DC power, suitable for electronic equipment, power supply, industrial equipment, automobiles and ships, etc. DC-099 DC5521 DC5525 DC Jack Socket
3.5mm AUX Round Panel Mount Cable, the panel interface design makes it easy to connect audio devices in a fixed position. It can reduce wear and tear on the built-in interface of the device. 3.5mm Chassis Mount Cable, 3.5mm TRS Audio Stereo Audio panel cable
3.5mm TRS 1/8'' round panel cable is a widely used connection cable for audio equipment, with good signal transmission performance and high compatibility, used in headphones, speakers and mixers, etc. The aluminum alloy 3.5mm stereo chassis mount cable is durable , provides a stable audio connection, and reduce interference and noise.
Ericsson 1/TSR 484 21/2000 Cable, Ericsson 1/TSR 484 21/3000 Cable, Ericsson 1/TSR 484 21/5000 Cable, Ericsson 1/TSR 484 21/8000 Cable, Ericsson RET Control Cable, RBS Base Station Telecom Cable
USB-RS485-WE-1800 is a USB to RS485 interface converter cable. It can convert the computer's USB interface to an RS-485 serial communication interface, and is commonly used in industrial equipment, automation systems, data acquisition, monitoring and control, debugging and programming, and other applications.
USB-RS232-WE-1800 USB Cable is equiped with FTDI FT232R Chipset, which can convert the USB interface to the RS232 serial interface. It is used to connect modern computers or devices with old devices using RS232 interface. It has a bare wire end design with RS232 signal output, which is suitable for industrial equipment, embedded development, debugging and other scenarios.
HDMI round panel cable is a HDMI cable specially used for chassis panel connection, usually used for HDMI signal transmission between equipment and wall or cabinet panel. It is convenient for wiring in a small space and usually has better durability and anti-interference ability.
D-type XT60 Charge Panel Mount Cable is ideal for all devices that require high current and high reliability, especially those that rely on lithium batteries for power. It is used for Drone, RC Vehicle, E-bike, Electric Scooter, Robotic, Solar Power System, FPV Drone, Portable Power System, etc.
22mm RJ45 Metal Panel Mount Network Interface Extension Cable IP65 with Cap, Chassis Connector RJ45 feedthrough IP65 Panel Mount Cable, RJ45-Buchse Stecker Ethernet Einbaubuchsen