Esperanto
Shqiptare
Euskara
Zulu
Latinus
Cymraeg
தமிழ்
Slovak
Slovak
Afrikaans
Products
PRODUCTS CENTER
Combo DB9 Male RS232 to RS485 RS422 Serial Converter converts RS232 signals to RS485 or RS422 through a DB9 male interface, to meet different serial communication needs. This adapter has two different locking design: front rivet nuts and rear locking screws. It can be used in industrial automation, data acquisition, remote monitoring, sensors and PLC, etc.
USB to RS485 TTL Serial Converter supports two serial port standards, RS485 and TTL, and can be compatible with various devices. It supports plug-and-play, and does not require additional power supply after connecting to the computer, and can directly draw power from the USB port. It is mainly used in industrial automation, data communication, embedded system development, Internet of Things IoT applications, smart meters and sensors, etc.
2-in-1 USB to RS485 RS422 Serial Converter can support two different serial communication standards, RS485 and RS422. It is connected via USB interface and does not require additional drivers. It can be used in industrial automation, data acquisition, remote monitoring, PLC, sensors, industrial control equipment and other applications.
USB to RS485 RS232 Serial Converter is an adapter used for serial communication. It supports both RS485 and RS232 serial communication protocols to meet different application requirements. It is powered by USB and does not require an external power supply. This converter is plug-and-play and you can start using it without complicated settings.
CAT8 Ethernet Extension Panel Mount Cable supports data transmission speeds up to 40Gbps and bandwidth of 2000MHz. It adopts male-to-female design and is equipped with screw panel (universal size) installation function, which is convenient for fixing cables in walls or cabinets, and can effectively prevent cables from loosening or pulling, and reduce signal interference. The cable length can be customized according to your actual needs.
Panel Mount CAT8 Ethernet Extension Cable supports bandwidth up to 2000MHz, provides transmission speed up to 40Gbps, and is compatible with CAT5e, CAT6, CAT6a and CAT7 standards. It uses high-purity copper wire and high-quality shielding materials to effectively reduce signal interference. The D-type panel design is a universal size and can be installed on Cabinet, Chassis, Panel, Box, etc.
USB to Rollover Console Cable transmission is RS232 serial communication signal, with USB to serial port conversion chip FTDI FT232R. Support plug and play, no external power supply required. Usually used to connect computers and network devices, routers and switches to configure and manage the devices through the terminal command line interface. Support customization!
USB to RJ45 Console Crossover Cable supports RS232 serial communication standard and is a common tool for network administrators to configure and maintain routers, switches, firewalls and other devices. This cable can directly access network devices using the USB interface through the USB to RJ45 console cable, avoiding the trouble of using a serial port converter. Compatible with Cisco USB Console Cable. Customization is supported!
USB to RJ45 RS232 Console Cables are commonly used to connect computers or other devices to the console port of network devices such as Cisco, Huawei, TP-Link routers and switches. These cables are often used for configuration, management, and troubleshooting of network devices, especially when the device cannot be directly accessed over the network. This cable is compatible with Cisco's USB Console Cable. Customization support!
CAB-SS-V35FC 26 Pin to V.35 Female Cable is designed for Cisco WIC-2T, WIC-2A/S WAN interface cards. 26-pin Smart Serial interface is usually used as a serial port for WAN connection on Cisco routers. V.35 interface supports synchronous serial communication data transmission up to 2 Mbps. This cable is compatible with Cisco Smart Serial CAB-SS-V35FC and supports customization.
CAB-SS-V35MT Smart Serial 26 Pin to V.35 Male Cable is a cable dedicated to serial communication. The V.35 interface is usually a 37-pin connector, a standardized interface with a rectangular shape, commonly used for data transmission, especially in high-bandwidth environments. This cable is usually used for connections between data communications and network devices, such as routers, switches, and serial devices. Customization is supported!
CAB-SS-6026X Smart Serial Cable is a serial crossover cable specially designed for Cisco network devices. It is mainly used for DTE to DCE connection between devices. This cable is particularly suitable for configuration, testing and data transmission of network devices. It is one of the commonly used serial cables in Cisco devices. Customization is supported!