Products

This NETBridge+ to H-MTD Automotive Ethernet Cable is an Ethernet communication cable designed for the automotive industry, which enables high-speed communication by supporting 100BASE-T1 or 1000BASE-T1 standard Ethernet interfaces. Both ends of the cable are standardized interfaces NETBridge NTHCF011A10S and H-MTD E6S10A-1CAZ5-Z. Customizable!

The ends of the NETBridge to H-MTD Automotive Ethernet Cable is NETBridge NTHCF011A10S and H-MTD E6S10A-1CAZ5-Z. This is specially designed for the automotive industry to support high-speed data transmission for in-car network communications, supporting 1000BASE-T1. It can be used for autonomous driving, in-vehicle infotainment systems, vehicle control systems, and vehicle networking. Customization is supported!

Waterproof MATEnet Connector Wire Harness is an automotive ethernet cable with waterproof TE 1802105-1 single-port connector on one end, and the other end is a MATEnet TE 2302454-9 Connector. It can withstand high temperatures, vibrations, and other harsh environmental conditions in automotive applications, and has high reliability and durability. Premier Cable offers a variety of different lengths and connection configurations, and supports customization!

Connecting Cable 4 Ports MATEnet is an automotive Ethernet cable consisting of TE 2370473-1 MATEnet 4 Ports connectors on one end and 4x TE 2302510-9 MATEnet Single ports connectors on the other end. It is designed to support in-vehicle network communication. This cable suitable for 100BASE-T1 and 1000BASE-T1 connections. The connectors and cable lengths can be customized according to your requirements!

MATEnet to H-MTD Automotive Ethernet Cable is an automotive Ethernet cable designed for automotive electronic systems. Its features include high bandwidth, low latency, high temperature resistance, strong anti-interference, and can support high-speed data transmission. It is suitable for applications such as autonomous driving, in-vehicle infotainment, and ADAS (Advanced Driver Assistance System). Customization is supported!

Automotive Ethernet Cable MATEnet 2302510-9 is a cable designed for automotive Gigabit Ethernet, used for high-speed, stable data transmission, and widely used in modern automotive electronics and autonomous driving systems. The connector should have higher durability and anti-interference, and be able to adapt to temperature fluctuations, vibrations, humid environments and other conditions inside the car. Customization is supported!

Gigabit Car Ethernet NETBridge Extension Cable is designed for automotive applications and complies with automotive Ethernet standards for data and signal transmission. NETBridge Cable has good EMI capabilities and offers miniaturization and sealed configurations. Our cables widely use original connectors from brands such as Molex, Amphenol, Rosenberger, JAE, Hirose, Tyco, etc. The cable length and connectors can be customized!

4-in-1 USB to RS232 RS422 RS485 TTL UART Serial Cable supports USB to RS485, RS422, RS232, TTL four different types of serial communication, with USB-A and USB-C combo USB interface, suitable for computers and serial devices with different interfaces. This converter cable has a built-in original FTDI driver chip. The cable length can be customized!

4-in-1 USB to RS232 RS422 RS485 TTL Converter has a built-in serial chipset, integrating 4 different serial communication interfaces: TTL, RS485, RS422 and RS232. You can use the same converter to connect to different serial devices without buying multiple adapters. Supports 3.3V and 5V voltage output. The USB interface uses a double-sided plug design to avoid wiring problems due to the narrow space.

DB9 Female RS232 to RS485 TTL Converter includes a DB9 female connector and 5 screw terminals. It is able to convert standard RS232 signals to RS485 or TTL signals, making it possible to connect and communicate with different types of serial devices. It is suitable for industrial automation, PLC control, data acquisition systems, building control, smart home, monitoring systems and other fields.

DB9 RS232 to RS485 TTL Converter has a DB9 RS232 male connector for RS232 signal input and provides RS485 and TTL level signal output ports. It contains a level conversion circuit and a corresponding serial communication chip to achieve signal format conversion. It can be used in industrial automation, communication systems or embedded devices and low voltage digital circuits.

2-in-1 RS232 to RS485 RS422 Serial Converter is a serial converter that supports both RS485 and RS422 standards. The converter uses a DB9 female interface and is suitable for serial ports of computers, PLCs, industrial equipment and other devices. It is suitable for industrial automation, remote control and data acquisition systems.

< 1...303132...134 >