Products

Right Angle MCX to Fakra Cable is a high-performance connectivity solution widely used in automotive, communications, IoT and RF communications. The frequency range typically supports up to 6 GHz, meeting the needs of high-speed data and RF signal transmission. Used in automobiles for GPS navigation, antenna connections, satellite broadcast receivers and in-car entertainment systems. Customizable!

Fakra to MCX RF Pigtail Coaxial Cable is a radio frequency coaxial cable used to transmit high-frequency signals, commonly found in automotive electronic devices. This cable connects the vehicle-mounted device with the external antenna. It is used in the vehicle's communication or entertainment system, such as navigation, TV, wireless communication, GPS, LTE or other antenna equipment connection, and is an important component of smart cars and communication systems.

FAKRA to MMCX Male Right Angle GPS Antenna Cable is a high-performance cable for connecting GPS antennas and receiving devices. One end is a FAKRA connector, and the other end is an MMCX male connector with a right-angle design, suitable for small spaces. The cable is made of high-quality material to ensure stable signal transmission with low loss, and is widely used in automotive navigation, drones, IoT devices and other fields. Customizable!

Fakra to MMCX RF Coaxial Cable is a high-frequency signal transmission coaxial cable that can connect the vehicle-mounted GPS antenna to the aftermarket navigation system. It has a Fakra interface and an MMCX interface at both ends, which can achieve compatibility between different devices. Customizable!

Fakra to SMA Coaxial Cable is a radio frequency coaxial cable that connects Fakra connectors (for automotive antennas and communication equipment) to SMA connectors (for antennas or modules for high-frequency signal transmission). It is commonly used in automobiles to transmit signals such as vehicle-mounted GPS, LTE, Wi-Fi antennas to vehicle-mounted communication modules or receivers. Customization is supported!

Fakra to Waterproof SMB Cable is an RF coaxial cable. One of the ends is a FAKRA interface, and the other end is a Flange Mount SMB interface with waterproof function. This cable can be used for GPS antenna connection, vehicle communication module, reversing camera or other vehicle camera system. Support customization!

Fakra to TNC GPS Antenna Cable is a RF connection cable, with Fakra and TNC connectors at both ends, usually used in automotive electronics, communication equipment, and wireless network equipment, etc., which require reliable, high-frequency transmission. This cable can be used for car GPS antenna signal transmission, car cameras and communication systems. Customizable!

FAKRA to BNC RF Jumper Cable is usually used for high-frequency signal transmission, suitable for vehicle-mounted systems, communication equipment, video surveillance, test and measurement, etc. In vehicle-mounted equipment, the FAKRA interface inside the car (such as GPS module or antenna) can be connected to external test equipment or monitoring equipment (such as a signal analyzer with a BNC interface). Customization is supported!

Fakra HSD to HSC HSL Auto Cable is a high-speed data connection cable for automotive electronic systems. It supports data transmission speeds up to 1 Gbps or higher and has strong electromagnetic shielding capabilities. This cable is Automotive Ethernet standard and can be used in in-vehicle entertainment systems, ADAS, communication modules (such as 5G modules, navigation devices). Customizable!

0.50 High Speed ​​HSC HSL Connector Cable is a high-performance automotive wiring harness, mainly used in low-power or high-speed data transmission scenarios. It has TE's 0.50 HSL 4 Pin Connectors on both ends. It can be used for in-vehicle network communications, advanced driver assistance systems (ADAS), infotainment systems, electric vehicles (EV) or hybrid vehicles (HEV). Customizable!

USB to Hirose HRS GT17 Cable is an Automotive Ethernet Cable. One end of the cable is a standard USB port, and the other end is a Hirose HRS GT17 series connector. It can be used to connect diagnostic equipment or in-vehicle infotainment systems (IVI) inside the car, providing a data interface for driving recorders, navigation devices, or control modules. Customization is supported!

USB to 0.50 HSC HSL High Speed ​​Link Automotive Cable is mainly used in automotive and other applications with high data transfer rates. It has a USB2.0 Type A connector on one end and a TE 0.50 Receptacle Contact (Automotive Crimp Contact) on the other end. It can be customized according to your needs.

< 1...91011...13 >