东莞市金叠电子有限公司
- Axia Cable
- AISG Cables
- Audio Cables
- Angled Cables
- Camera Link Cables
- Cisco Console Cable
- Circular Connector Cable
- CAN Bus Cable Adapter
- Deutsch J1939 Cable
- Call Center Headset Cable
- FTDI Cables
- Radio Programming Cable
- IP67 Waterproof Cable
- Molex Cable
- OEM Cables
- Panel Mount Cables
- Round Panel Mount Cables
- RJ12 RJ45 Cables
- Terminal Block
- USB Cable
- USB to RS232 RS485 Cable
- Video Cables
-
Axia Cable
-
AISG Cables
-
Audio Cables
-
Angled Cables
-
Camera Link Cables
-
Cisco Console Cable
-
Circular Connector Cable
-
CAN Bus Cable Adapter
-
Deutsch J1939 Cable
-
Call Center Headset Cable
-
FTDI Cables
-
Radio Programming Cable
-
IP67 Waterproof Cable
-
Molex Cable
-
OEM Cables
-
Panel Mount Cables
-
Round Panel Mount Cables
-
RJ12 RJ45 Cables
-
Terminal Block
-
USB Cable
-
USB to RS232 RS485 Cable
-
Video Cables
CAN BUS DB9 Cable with Resistor Terminator
CAN Cable with CAN Bus Terminators
DB9 CAN Cable with 120 ohm resistor
DB9 CAN Bus Terminator Cable
We provide pre-terminated CAN bus cables for our drives that support the CANopen communications protocol
The cables are designed for use in CAN systems. They are suitable for nearly all CAN devices.
Shield connected to GND ， with 120-Ohm termination resistors， Suitable for the use in CAN FD buses
This CAN Cable is 2 meters in length with DB9 female connectors on each end WITH 120 ohm terminators in each DB9.
The cable consists of stranded 24 AWG copper twisted-pair conductors for the CAN signals; electronic grade flexible polyethylene insulation, tinned copper shield and a flame retardant violet PVC jacket.
A terminator should be used at the end of each bus system, the terminator provide line balancing for best CAN signals.
For use with all versions of these Peak PCAN adapters:
USB
PCI
mini PCI
Compact PCI
Express
PCMCIA
PC/104
PC/104+
ISA
Signal: Pin - Pin
CAN_L 2 - 2
CAN_GND 3 - 3
CAN_H 7 - 7
120 Ohm terminating resistor across CAN\_L and CAN\_H in each connector
Cables and connectors complies to ISO 11898 and CiA® specification CiA 303-1
The CAN-GND signal is connected to cable shield to protect the differential signal against electromagnetic influences.
Tappings at the main bus cable can be realized with T-connectors in order to insert CAN nodes.
Both ends of the CAN net have to be terminated externally via 120 Ω termination.
Copyright 2020 Premier Cable CO.,LTD Suport:300.cn Dongguan 粤ICP备2020142126号
